The Cookie Helmets Multitool
This vivid red Cookie Multitool carries the correct bit load to fit the majority of Cookie Helmet and Camera Accessories.
This driver is metal with a magnetic cap. It's hefty for its small size with grit for grip to help when maintaining your Cookie helmets!
Here is the Bit Load List:
1/8 Hex
5/64 Hex
3/32 Hex
3/16 Hex
7/64 Hex
5/32 Hex
Phillips-Star (PH2) Screwdriver
You can order yours today at the link below:
https://www.chutingstar.com/cookie-helmets-multitool
The NEW FlySight 2 Audible GPS is here!
We are to receive our initial orders this week!
Order yours today at the link below:
https://www.chutingstar.com/flysight-2-audible-gps
Notes on mount compatibility between the Flysight 1 and FlySight 2:
The FlySight 2 has the same footprint as the FlySight 1, so it is compatible with the FlySight 1 aluminum mounts as well as the Cookie FlySight mount. However, it is not compatible with mounts like the one from Adrenaline Workshop, which enclose the entire unit, as the new case is a little taller on one end than the old one.
The new FlySight 2 Mount is not compatible with FlySight 1 units. The FlySight 2 slides onto posts at the front of the new mount, then rotates down and clicks into place at the back like a ski boot. The FlySight 2 is released by pulling back on the tab, either by hand or using the included tool.
The curve on the bottom of the FlySight 2 mounts is the same as the original FlySight 110/110 mounts, which should fit most helmets. Unfortunately, it was not possible to produce this new mount with several different curvatures, but the manufacturer is looking into 3D printed spacers to adapt the mount for helmets with different shapes.
Ask ChutingStar #8
More of your questions answered!
Check out Blog at: https://www.chutingstar.com/blog/
Create your ChutingStar Account today
https://www.chutingstar.com/customer/account/create/
Send us your questions at:
https://www.chutingstar.com/contacts
https://www.chutingstar.com/frequent_questions
Music from ChutingStar owner Mike Gruwell of One Drummer Drumming. Visit https://onedrummerdrumming.com/discog... to download or stream the full song and more from Mike's full discography.
https://www.chutingstar.com/skydive/lifestyle-and-gifts/skydiver-extras/mike-gruwell-that-gtown-sound-album-cd-1
How to Change the Main Closing Loop on your container.
If you are a licensed skydiver your should know by now how to pack your main parachute and how to replace your main closing loop when it is showing signs of wear or it breaks.
Today we have put together a brief tutorial on how to do that.
You can find the replacement main closing loops on our site at the link below: https://www.chutingstar.com/main-container-closing-loops-5-pack
Don't miss this one! We have a brand new PD Sabre 3 150 in stock at a discounted price.
If you don't want to wait to get your new main canopy and you are looking into a 150 Sqft Main, this one is for you!
Order it today at the link bellow:
https://www.chutingstar.com/used-skydiving-gear/skydiving-gear/canopies/new-resale-sabre3-150-main-parachute-canopy
How to setup the Parasport Altix Digital Altimeter
The Parasport Italia Altix Digital Altimeter is a simple wrist-mounted altimeter, easy to read and use.
Features basic altimeter functions and also records exit and pull altitudes, as well as freefall time, of your last jump. In addition, there is an altitude simulation mode to help train students to recognize altitude during ground training.
Delivered as standard with elastic band in 5 color options.
Separately available comfortable hand mount.
Digital skydiving altimeter with large digits display
No need to power on or calibrate
Manual reset allowed
Metal case
Water-resistant
Altitude range: 0-33,000 ft. (0-10.000 meters)
Temperature range: -25 .. +70 °C (-13 .. +70 °F)
Statistics about the last jump: exit altitude, pull altitude, freefall time
Display of the number of digits in freefall can be configured in Meters or feet
Freefall simulation with user setting of exit and pull altitudes
Configuration information is preserved when changing the battery
Drop zone offset can be set up to 1500 meters (5000 feet) above or below the airport
Battery status indicator
Batteries: 1 x Renata CR2450N
Size: 50 x 15 mm
If you are looking to order one, you may do so at the link below:
https://www.chutingstar.com/skydive/altimeters/digital-altimeters/parasport-altix-digital-altimeter
13
views
How to Order Spare parts for your Rig
Sometimes cutaways happen and they don't come cheap!
You can find all the components and spare parts for your skydiving rig at www.chutingstar.com
Whatever we don't have in stock can be ordered from the corresponding manufacturer.
Please check the "Rig Parts" section on our site for more information.
https://www.chutingstar.com/skydive/rig-parts
https://www.chutingstar.com/contacts
Music from ChutingStar owner Mike Gruwell of One Drummer Drumming. Visit https://onedrummerdrumming.com/discog... to download or stream the full song and more from Mike's full discography.
https://www.chutingstar.com/skydive/lifestyle-and-gifts/skydiver-extras/mike-gruwell-that-gtown-sound-album-cd-1
Trivia Tuesday#3 Do you know what a "Mudflap" is and where it is located on your container?
Check out our Blog filled with great information.
https://www.chutingstar.com/blog/
Where is the Flysight 2???
We know you are all waiting on the version of the FlySight to come out, but we still don't know when it will be available.
The original FlySight is in stock and ready to ship at https://www.chutingstar.com/skydive/altimeters/audible-altimeters/flysight-audible-gps
Want to be notified when new products come out or when new blog articles are available?
https://chutingstar.us20.list-manage.com/subscribe?u=2153d515ee2ca481fc24ec9fe&id=b11e9da5ae
Spectra Line or Micro Line? Answer to our Trivia Tuesday Question.
Thank you for all your answers!
Know your gear, and learn more about the components and materials that make your skydiving rig function.
Check out our Blog filled with great information.
https://www.chutingstar.com/blog/
Trivia Tuesday! Do you know the difference between Spectra line and Microline?
Know your gear, and learn more about the components and materials that make your skydiving rig function.
Never do these five things at the DZ
Make sure to check out our blog for interesting articles on gear at:
https://www.chutingstar.com/blog/
Sign up for our newsletter and always be notified when new products are available!
https://csene.ws/newslettersignup
Cypres Service Turnaround Times
Current lead times are 6-8 weeks, so please keep that in mind when sending your Cypres unit in for maintenance.
If you would like to send your unit for maintenance, please follow the link below:
https://www.chutingstar.com/cypres-aad-service-maintenance
2
views
Do Visual Altimeters come with a Mount?
Yes, all wrist-mounted altimeters come with a hand mount from the factory so they are ready to use out of the box.
With a hand mount, the altimeter sits on top of your palm with a strap that goes around the wrist and a finger loop.
Elastic Wrist Mounts are also available as an extra option but do not come standard.
You can find all the types of wrist mounts or hand mounts for your altimeters at the following link:
https://www.chutingstar.com/skydive/altimeters/altimeter-mounts
7
views
Ask ChutingStar #7
More of your questions answered!
Check out Blog at: https://www.chutingstar.com/blog/
Create your ChutingStar Account today and start earning rewards for every purchase online!
https://www.chutingstar.com/customer/...
https://www.chutingstar.com/reward-po...
Send us your questions at:
https://www.chutingstar.com/contacts
https://www.chutingstar.com/frequent_...
What batteries should I get for my visual or audible altimeters?
ALWAYS! Get the type and size of batteries that are recommended by the manufacturer to ensure your unit works and performs properly.
L&B Altimeters are well known for having a great battery life when the correct batteries are installed on your unit.
You can find these at the link below:
https://www.chutingstar.com/skydive/altimeters/batteries-and-chargers?manufacturer=Larsen+and+Brusgaard
New TonFly Mounting Upgrades for Camera Helmets
Now, when ordering a new TonFly Camera helmet you have a variety of mounting options and camera boxes to choose from depending on the type of setup you will be installing.
To learn how to order your custom TonFly Helmet follow the link below:
https://youtu.be/VdiUhz__iqI
Where to order? Click below!
https://www.chutingstar.com/skydive/helmets/camera-helmets?manufacturer=TonFly
1
view
What you need to know when installing the Utility Plate on your Cookie G35
Your cookie G35 comes with 6 screws that hold the top plate in place.
When you purchase the Utility Plate Kit, it will come with 4 additional screws that are to be used in conjunction with the other 6 you already have in your helmet. to properly attach the Utility Plate to the helmet.
You can see how to install the Utility Plate in the link below:
https://youtu.be/jA3cNG5lof0
To purchase the Cookie G35 Utility Plate please click on the link below:
https://www.chutingstar.com/cookie-g35-top-plates
8
views
AAD Stock Available
If you are looking to purchase a new AAD we do have Cypres and Vigil units available today.
Please your order online at: https://www.chutingstar.com/skydive/skydiving-rigs/aads
The TonFly TFX Helmet Bag is here!
Another option from TonFly to protect your TonFly Helmet or any other helmet currently in the market.
Available in 3 sizes to custom fit your TFX:
Shell 0 - Small
Shell 1 - Medium
Shell 2 - Large
Note: If you're unsure of your TFX Shell Size, or you want to fit any other full face helmet in this bag, such as the the G35, G4, KISS, ZX, Rawa or any Bonehead full face helmets, then choose Large. The difference between the 3 sizes is fairly minimal, and the Large fits all current full face helmets as well as all TFX sizes.
You can order yours today at:
https://www.chutingstar.com/skydive/helmets/skydiving-helmet-bags/tonfly-tfx-helmet-bag
It is taking too long to get a PD Optimum Reserve!
Currently, most manufacturers are experiencing delays when producing parachutes.
As some may know the PD Optimum Reserve is taking a little longer to produce due to material shortages. But you can still order a PD Reserve (regular reserve)
Please double-check your harness and container system sizing before ordering to make sure it will fit correctly.
You can find the available colors and sizes in PD's stock list online at the link below:
https://canopix3d.performancedesigns.com/StockCanopies.aspx
Copy and paste the "Stock ID number" in the field marked in chutingstar.com so we can order the one you want.
https://www.chutingstar.com/skydive/skydiving-rigs/canopies/performance-designs/pd-reserve-parachute-canopy
1
view
Still Rockin' the Old Factory Diver?
If you need to replace the visor on your beloved Factory Diver Full Face Helmet, look no further!
Click on the link below where you can order yours today.
https://www.chutingstar.com/skydive/helmets/helmet-visors/skysystems-factory-diver-replacement-lens
Schumacher Ring sight Extender Screws
If you noticed, the screws on these kits changed, now you have two white nylon screws and two black nylon screws, NOT STEEL, nylon.
The purpose of these being nylon is that they brake of in the event of an entanglement.
You can find these on our site at the link below along with the other components you will need.
https://www.chutingstar.com/camera/skydive-video-gear/ringsights
How to adjust the Collar on a Cookie Full Face Helmet
Adjusting your helmet to your fit before you go skydiving is very important so you have a comfortable fitting helmet and it doesn't fly off your noggin during the jump.
Feel free to contact us with any questions or concerns about skydiving gear ant the link bellow:
https://www.chutingstar.com/contacts
Signup for our newsletter or create an account:
https://csene.ws/newslettersignup
https://www.chutingstar.com/customer/account/login/