3 years ago

Building a diy base cabinet part 2. Build a base cabinet yourself diy. I built this base cabinet for our food pantry in our pole barn house.
I wanted to make this video to give you ideas how it possible to do it with just a few tools without spending too much, and limited work areas. I finally got part 2 done.
If you missed part one go watch that first. https://youtu.be/bH_lQpVTB_Y
Total cost for this build including everything was $1058.27. This way I was able to build it with solid wood and 3/4 inch plywood shelves so it will hold a lot of weight. Most of the cabinets I looked at were just made with pressboard and the cheapest most basic cabinets you can find. It was $1600 just for the for the 4 base cabinets.

Here are all the links I could find that might help you find things you need.
Wood glue I like Gorilla and Titebond - http://bit.ly/Woodglue
Ecoprocote polyurethane for countertop http://bit.ly/EcoProCote
Kreg pocket hole jigs - http://bit.ly/KregJig
Kreg cabinet hinge drilling jig - http://bit.ly/CabinetHingeJig
Kreg clamps - http://bit.ly/KregClamps
Blum cabinet hinge I used 20 pack http://bit.ly/BlumHinge
Blum hinge restrictor clips I used http://bit.ly/HingeRestrictorClip
Cabinet door bumpers http://bit.ly/CabinetDoorBumpers
Stak Racks http://bit.ly/StakRacks
Wood filler http://bit.ly/DapWoodFiller
Tack cloth http://bit.ly/TackCloth
400 grit sandpaper between coats http://bit.ly/400GritSandpaper
White bristle brush for countertop http://bit.ly/WhiteBristleBrush
Random orbit sander http://bit.ly/RandomorbitSander
220 grit sandpaper http://bit.ly/220SandPaper
Cordless drills - http://bit.ly/CordlessDrillS
Cordless routers - http://bit.ly/CordlessRouter
Rabbiting Router bit as long as it can do 1/2" wide - http://bit.ly/RabbitingRouterBit
Shelf edge banding iron on - http://bit.ly/ShelfEdgeBanding
Best Tape measure - http://bit.ly/TapeMeasureMax
Grk trim head screws various sizes - http://bit.ly/TrimHeadScrew
Grk wood screws various sizes - http://bit.ly/WoodScrews