5 months ago

Technology Tutorials bicycle service bicycle cycle bike bike service repair service mechanic bike mechanic

The bicycle slows down badly. Additional brake sound. Screeching, creaking pads do not grab.
The bike doesn't want to slow down! These are all signs of a dirty brake system.
When oil gets on the bicycle brake, everything starts to creak and slow down badly.
In order to fix this problem, we need remove the brake disc and remove the pads.
We will degrease the pads and brake disc. Everybody must be perfectly free of residues of grease and debris.
Cyclists will definitely enjoy watching this video.

00:00 Bicycle brakes squeak.
00:10 If you squeeze the brake pads, you can hear the pads squeak.
00:25 Removing a wheel from a bicycle.
00:41 How to remove the brake pads from the brake caliper of a bicycle.
01:27 You can see a ball of cobwebs on the pads.
01:32 Degreasing the caliper on a bicycle.
02:13 Shorten the brake cable as it is loose.
02:41 Remove the brake disk from the bicycle wheel.
03:29 Degrease the brake disk of a bicycle.
04:12 How to clean a bicycle brake disk properly.
04:26 It is very important to remove all dirt inside the perforations of the brake disk.
06:12 What you need to do to keep your bicycle brake disk from squeaking.
06:20 It is important not to overheat the brake disk, so that it does not spoil.
06:39 Degrease the brake pads on your bicycle.
07:25 The brake pad spring must be cleaned.
07:55 How to remove oil residue on bike brake pads.
08:08 The main thing is not to overheat the brake pads so that they do not fall apart.
09:05 Installing brake pads in a bicycle caliper.
09:45 Installing the wheel in the bicycle frame.
10:22 It is very important to clamp the wheel when the bike is perpendicular to the floor.
10:36 Adjusting the bicycle brake, after cleaning.