Restoration - Rusty Stuck Coil winding Machine | Electric Tool Restoration
Restoration - Rusty Stuck Coil winding Machine | Electric Tool Restoration
In this video, I'm restoring a rusty and stuck coil winding machine! The winding machine was very rusted, and the counter meter was not working properly. And the screw to connect it to the table was missing. In the first inspection, I noticed that the coil winding machine's mechanism was stuck. Time to disassemble this rusty coil winding machine! The disassembly was a little tricky because of all the rust. After disassembly, I gave all the rusted and greased parts a nice bath to remove the loose rust and dust in gasoline and degreaser. the next step was to remove thick rust from the coil winding machine's surface. Then all parts ( gears, shafts, etc.) got wire brushed. After those processes, the parts were rust-free and free of all grease.
The next big step was to repair the counter meter. A big part of the restoration was filing away those casting marks and cleaning the surface with body filler.
I filled every bigger area of the metal part with body filler and sanded it down again to make sure the surfaces are very smooth.
The next step was to give the rusty coil winding machine a nice paint job.
For the paint job I chose blue and gave the stuck coil winding machine a complete new paint job including a primer, the paint, and a clear coat.
While the paint job dries, I had time to restore the small parts (screw, bolts, pins, etc.) I cleaned and sanded them, and gave them a nice polish for a good finish. All parts restored now,
So it was time to reassemble the coil winding machine. Every part got a good load of grease. After everything was reassembled and the coil winding machine restoration was mostly done, In the final test I had to wind the coil and as you have been seen in the video above the counter meter was working well.
End of story: the very rusted and stuck coil winding machine becomes a new-looking well working!
Thanks for watching! Did you enjoy the video? You like the video and want to support my channel? It helps me a lot! Leave a like, Leave a comment, subscribe, and hit the notification bell! You didn't like the video? Tell me your criticism in the comments and tell me what could've been done better!
Please subscribe if you want to see more cool upcoming projects 🙂 And DON’T forgets to see Antique Rusty Metal Cutter Restoration - Click here: 👉 https://youtu.be/0ICaBtnEKWA Thanks for watching my channel. See you soon. Hopefully, this video gives some of you that ASMR feels or helps you fall asleep on those difficult nights.
I hope you enjoy the video!
I am happy to receive your feedback, advice, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
---------------Thank you so much for Likes & Comments---------------
#restoration #windingmachine #repair #electrictool
If you want to help me create more cool videos you can support me on
PATREON: 👉 https://bit.ly/2Lk3wqz
OR Subscribe My channel 👉 https://bit.ly/2klQknQ
Follow me on Instagram https://www.instagram.com/stuckytuberestoration/
My Facebook Page: https://m.facebook.com/Restorationcircle786
👉 DISCLAIMER: This Channel DOES NOT PROMOTE Or Encourage Any illegal Activities, All Contents Provided By This Channel Is Meant For EDUCATIONAL PURPOSE Only.
-
35:35
Old Is Gold
3 months agoOld Rusty Electric Motor - Restoration
182 -
24:48
Old Is Gold
4 months agoBroken Rusty Screwdriver - Perfect Restoration
61 -
15:54
PeoplesCar
2 months agoDIY Vibratory Tumbler Part:2 - BEST MEDIA TO USE - Home Made Rust Removal & Metal Deburring.
10 -
7:49
ALLCHECKOUT
3 months agoZFULVO Cordless Brushless Angle Grinder (Kuang Tian), No Spindle Lock, 16.8V, Review And Tutorial
3 -
36:34
Fixin2Ride-Official
2 months ago02 Arctic Cat ZR 800 CCE Rebuild Part 6: Improving and Restoring A-Arms
341 -
10:35
Jimstools
2 months agoSuper rusty wrench restoration
11 -
57:38
Kurenai5000
1 month agoRepairing, building and tuning the deconstructed motor
5 -
17:46
Classic AirCooled Volkswagen Channel
2 months agoDIY Vibratory Tumbler - Home Made Rust Removal Metal Deburring Build Guide
20 -
10:21
Nice Bike Service
3 months agoHow to remove bicycle cranks when the thread is damaged. Best working solution!
3 -
6:49
Fixin2Ride-Official
2 months ago02 Arctic Cat ZR 800 Rebuild Part 2 || Welding in the New Heat Exchanger
26