Snow plow quick attach Plate
This is a modified quick attach plate to adapt a BXpanded plow so it does not have to attach to a bucket. Before the plow stuck out even Further as it was attached to the bucket. That used to be necessary for me because I didn't have quick attach. The bucket used to pin on. Now by adapting a quick attach plate I can use the plow independent of the bucket. It shortens up the whole tractor making it a little more maneuverable. I hope it gives you some Ideas.
The plate cost me $100.00 from eBay and the rest was made with scrap material I had. I used a spray transfer method to weld the 1/2" plate to the 3/8 angle. I fabricated some tabs on the back side to be able to bolt it to the BXpanded frame work. The quick attach plate can easily be remove if I ever needed to attach it back to the bucket. We haven't had any real snow here in a while at least since I purchased the snow blower 2 years ago. Which is why I said this will probably ensure we get no snow in the near future.
Later all.
-
7:34
Breaking Free Off Grid
2 years agoSnow Plow In Action
981 -
1:08
Capricorne888
1 year agoSnow plowing with a truck
291 -
0:31
Maxamfrce
3 years agoHome-made Snow Plow
51 -
10:35
Farming, Homesteading & Family Thoughts
1 year ago $0.01 earnedSnow plowing & Looking 200 ft down on the Farm
5 -
4:54
NorthernSeclusion
3 years ago $0.02 earnedMoving snow with the Farmall M Tractor.
2513 -
17:41
Donn DIY
2 years agoUTV Snow Plow BUILD - Part 2
19 -
0:18
Johnnymac04
1 year agoSnow plow
5 -
2:27
Christian Recording Artist, Eric Horner
3 years ago $0.46 earnedRedneck Snow Plow 2021
295 -
4:16
Hungry Lee
3 years ago $0.02 earnedMahindra 2638 Snow plowing
107 -
19:35
Donn DIY
2 years agoUTV Snow Plow BUILD - Part 1
14