KOHLER Cimarron Comfort Height 1.28 GPF Single Flush Elongated Toilet Bowl & Seat K-11451-0Store

KOHLER Cimarron Comfort Height
Complete Solution 2 Piece 1.28
GPF Single Flush Elongated
Toilet Seat IncludedShow more

Internet # 100658777
Model # K-11451-0Store
SKU #542514Store SO
SKU #1000388729

KOHLER Cimarron Comfort Height
Complete Solution 2 Piece 1.28
GPF Single Flush Elongated
Toilet in White Seat Included
(09-06-2020)

Cost: $139.99

HomeDepot: https://www.homedepot.com/p/KOHLER-Cimarron-Comfort-Height-the-Complete-Solution-2-Piece-1-28-GPF-Single-Flush-Elongated-Toilet-in-White-Seat-Included-K-11451-0/100658777

Easy install with included toilet seat, wax ring, and hardware
KOHLER AquaPiston releases water from 360 degrees around
Comfort height offers chair-height seating (about 2 in. taller)
Product Overview
This WaterSense-labeled, high-efficiency toilet combines water conservation with the versatile style of the Cimarron collection. A 1.28 Gal. flush provides significant water savings of up to 16,500 GPY, compared to a 3.5 Gal. toilet, without sacrificing performance. The toilet features innovative AquaPiston technology, a patented flush engine that delivers a fast, powerful and plug-free flush. This complete solution package comes with all the necessary installation parts for added convenience.

2-piece toilet
Elongated bowl offers added room and comfort
Comfort height feature offers chair-height seating that makes sitting down and standing up easier for most adults
1.28 GPF (gallons per flush)
Complete solution toilets provide everything you need in 1 box, including bowl, tank, seat, wax ring and floor hardware
Standard left-hand trip lever included
Supply line not included
Coordinates with other products in the Cimarron collection
Available exclusively at The Home Depot
Single-flush gravity uses the force of gravity and a precision-engineered tank, bowl and trapway to create a strong siphon during flushing
AquaPiston canister allows water to flow into the bowl from all sides (360°), increasing the power and effectiveness of the flush
Flush valve's 3:2 ratio harnesses the natural force of gravity and optimizes flush performance
Durable canister design has 90% less exposed seal material than a 3 in. flapper for leak-free performance
Light-touch canister flush requires a lower actuation force than a flapper
Standard 12 in. rough-in
Drylock system saves installation time and helps prevent water leakage
Watersense toilets meet strict EPA flushing guidelines, including using at least 20% less water than 1.6 Gal. toilets
Eligible for consumer rebates in some municipalities
Class 5 flushing technology

WARNING: Risk of property or
product damage.

Do not use in-tank cleaners in your toilet.
Products containing chlorine (calcium
hypochlorite) can seriously damage
fittings in the tank. This damage can
cause leakage and property damage

Before You Begin
Remove the old toilet, T-bolts, and
wax ring. Inspect and repair the
water supply.
IMPORTANT! If the toilet will not be
installed right away, temporarily
plug the waste flange with a rag.

Install T-bolts and a new wax
ring. Remove the rag if the waste
flange was plugged.

Apply weight evenly.
Do not move after placement!
Watertight seal may be broken

Install the washers and nuts as
shown.
Do not overtighten!

if needed, cut off the T-bolt
before installing the bolt cap.

Install the gasket and the bolts
onto the bracket.

Tighten the bolts evenly.
Do not overtighten!

Connect supply and turn on the
water. Check for leaks.
Do not overtighten!
If needed, adjust the water level.
Seats may vary.