Super Mario S.H. Figuarts playset type A
Today we open a Mario World playset. This little set comes with a Green base, clear stand and adapter for your S.H. Figuarts Mario. The base has three holes. One hole in the center top and two holes that are plugged on the left and right side. The plugs are easy to remove from the bottom of the green base. The blocks have holes on one side so you can plug them in to a clear base and sit them on a raised clear platform that plugs in to the green base. You also get a shiny coin and a goombah. There are two stands for the coin. The stands hold the coin directly to the base or raised about two CM above the stand. I like this little set even though I do not own the Figuarts Mario figure. I hope you enjoyed the video. Thank you for watching. Take it easy.
7
views
Masters of the Universe Origins Faker unboxing
Today we open a blue He-man. Faker comes with a nice orange sword and some rubbery armor. The armor is easily removed to reveal his robot viewing window. Rather than a sticker like the vintage figure this is a Permanent decal. The decal forms to his chest so it looks a little weird. Typical MOTUO articulation. His knees and ankles felt a bit loose to me but I did not have any trouble posing or standing him up. I hope you enjoyed the video. Thank you for watching. Take it easy.
19
views
1
comment
Detective Conan S.H.Figuarts -Resolution Edition- Conan Edogawa
Today we unbox a Conan. This is a great figure. Lots of articulation allow you to position him in to poses from the show easily. The paperwork in the box show the soccer ball being attached to a stand but I guess they are just showing that it can be done as there was no stand in the box. Conan comes with lots of different hands. He has two fists in by default then he has a hand holding how tie voice changer and a corresponding hand so he can hold it with both hands. There is a hand with the detective boys communicator. There is a hand with the wrist watch both opened and closed and a hand for the opposite arm that you can use to make him appear to be pressing the button on the watch. Then there is a pointing hand and two open hands. He has five different faces and two pairs of glasses one normal and one with the heads up display. The glasses slip on easy and stay on well. There are two neck parts. One with the Bow tie on and one with is off. Conan also has magnets in his feet and metal inside the skate board. The skateboard clicks right on to the feet. I am really happy with this figure. I hope you enjoyed the video. Thank you for watching. Take it easy.
18
views
1
comment
Kotobukiya Marvel Comics Wasp Bishoujo Statue
Today we open a Wasp. The window has become partially detached inside of the box but the figure was in fine shape. Looking at the figure it does not appear the black part of her costume was painted. It appeared to be raw black plastic to me. Maybe I am wrong though. The gold details were nicely painted and the face looks decent. Open mouths on statues do not work very well in my opinion. They never look quite right to me. The wings have a nice pearl rainbow like effect on them. The wings plugged in easily once i figured out which one went where. Water splash base looks nice and is translucent. The base is screwed in to her foot. You do not attach it yourself. I am nearly out of kotobukiya statues now. I hope you enjoyed the video. Thank you for watching. Take it easy.
23
views
1
comment
What is in the box - OVA Edition
Today we take a look at a book called "Dig The OVA Grave" I found on Japanese Mercari all about the OVA boom of the 80s. Thumbing through the pages there are few pictures but I am hoping to find some OVA's that i have not yet seen. I hope you enjoyed the video. Thank you for watching. Take it easy.
24
views
2
comments
The LEGO Movie 30282 Super Secret Police Enforcer 40 pc
Today we open and assemble a Lego movie set of bricks. This set comes with a mini figure. There were a few extra pieces after fully assembled as well. This little vehicle did not look like much on the packaging but I was pleased with the final build. The hinged wings bent down give it an overall pleasing shape. The police robot looking mini figure has some nice details on the body and face. He comes with a classic style visored helmet and a space gun with what appear to be giant iron sights in the form of a clamp. I think I have a few more sets from the movie somewhere. I will have to look around my warehouse and see if i can find them. I hope you enjoyed the video. Thank you for watching. Take it easy.
30
views
3
comments
WWE Superstars Doink unboxing
Today we open a Doink. This is another great figure. The face is spot on. The open mouth laugh is just the way I remember Doink. Even with the mouth open the face is creepy. The bright green clown fro hair is great. The cloth coat is a great fit and is well made. I love everything about this figure. I never thought I would ever be so happy about a Doink the clown action figure. I hope you enjoyed the video. Thank you for watching. Take it easy.
35
views
1
comment
Transformers Collectors Club Legends Class Megatron
Today we open a Megatron. This little G2 style Megatron is easy to transform and both robot mode and vehicle mode look great. Megatron's head can rotate to the left because of his transformation but it does not rotate to the right. The shoulder cannon lifts in robot mode. The arms rotate on a ball joint at the shoulder. The legs are on ball joints attached to the hips and have hinges at the knees. I have always liked the G2 Megatron design. I hope you enjoyed the video. Thank you for watching. Take it easy.
35
views
2
comments
Temu Tuesday "150 pieces Goddess story Wind and snow moon flowers anime collection cards"
Today we open some bootleg animu waifu cards. These cards are a bit better quality than the conan bootleg cards I opened a while back. The card stock is nice thick material. I thought they were plastic cards at first. Some of the cards do still have issues with scuffing on the front and back like the conan cards but no where near as bad as the conan set. They are made by the same frog card company so it is not a big surprise. I seem to have completed three sets out of who knows how many sets. I like the special cards with the embossed fronts or backs. The embossed backs have a nice feel to them. If you want any of these bootleg cards and see these on ebay for more than $20 you may want to check alibaba or temu. You can pick up the boxes there for anywhere from $6-25 shipped. I hope you enjoyed the video. Thank you for watching. Take it easy.
Temu Affiliate code: acm818077
32
views
Temu Tuesday Boot-Legos "5pcs/lot Soldier Models, Fun Building Blocks Figures, Gift For Friends"
Today we open a second collection of not 40k mini figures. These little things are great. The armor pieces all snap on and plug in tight and stay in place. I did not notice any new weapons in this set. The guns with the clear blue parts are pretty sweet. The paint work is limited but those small details make the backpacks look great. I really like the plug in symbol for the chest armor. It finishes the figure look nicely. There are similar sets that have a decal instead of this plug in symbol. If you decide to pick some of these up keep that in mind. I hope there will be more not 40k mini figures in the future. Thank you for watching. Take it easy.
Temu Affiliate code: acm818077
37
views
2
comments
Masters of the Universe Origins Buzz-Off unboxing
Today we open bee. This bee looks just like the 80s bee. It is a great recreation with a few improvements aside from the articulation. The claws have a rounded inner grip so he can hold his ax by the grip but the ax also fits snug around the claws the way it was made to fit on the 80s figure. Another improvement is on the cap and his head. There are two little holes in the cap and the new version has antenna on it so the cap can slip on to the antenna and stay on his head. The cap on the 80s figure just sat on his head. The wings work about the same and attach the same way. I love these origins figures. I hope you enjoyed the video. Thank you for watching. Take it easy.
35
views
2
comments
Neo Henshin Cyborg No. 1 yellow unboxing
Today we open a Cyborg. The box is in rough shape but the toy inside was mostly fine. The batteries in his back were a bit corroded and his head, helmet and hands were leaking plastisizer making them sticky. After cleaning the battery compartment and replacing the batteries the light up feature worked. The hands and head cleaned up well with a soap and water, then dabbing the sticky parts with packing tape to remove the oils from the surface. The face is removable from the silver head with a bit of wiggling. The helmet fits over the face. The helmet was a bit tight to install but once it is on it looks good and sits properly. I really like the clear body with robotic looking inner details. This figure looks a lot like the larger older GI JOE figures. I hope you enjoyed the video. Thank you for watching. Take it easy.
19
views
1
comment
Jakks pacific World of Nintendo Series 1-2 Gannondorf figure unboxing
Today we unbox a Gannondorf. The articulation on this figure is not great but it is better than some of the other early Jakks Pacific World of Nintendo figures. His head moves side to side. The arms are on hinged swivels. There is a hinge at the elbow. The hands are on a swivel. That is it. The neck down of the body is completely solid. If you are interested in this figure he has been dirt cheap forever on ebay. I hope you enjoyed the video. Thank you for watching. Take it easy.
20
views
Corbot V 2016 Eternal Warfare Final Armageddon CV-002 Mugger unboxing and conversion
Today we open a not Allicon. This not Transformer looks great. His teeth and spikes on the head are pretty sharp. Be careful when handling those areas. The transformation is fairly simple. Everything fits in to place well. The feet pull down and give him a little extra articulation in the ankles. His staff is a tight fit in the hands where it is wider. The spikey ball on the staff pulls off so you can put it in his hands. There is the Robot mode, Alligator mode and a bonus gun mode. The gun is a bit big on star scream but might look interesting on larger transformers. I like this little guy a lot. I hope you enjoyed the video. Thank you for watching. Take it easy.
34
views
1
comment
Masters of the Universe Origins Turtles of Grayskull Mouse-Jaw
Today we open a Mouser. I really like some of these Tmnt x Motu crossover figures. The mix of mouser and trap jaw is pretty great. The white mouser jaw on Mouse-Jaws face is hinged so you can open and close it. The arm cannon has a hinge mid way up like an elbow. I feel like the yellow fire effect is a little too large. The extra arm is for a build a figure Roboto. The blue weapons fit Mouse-Jaw but are also for the BAF. Trap jaws chest armor and belt are rubbery material and removable. The belt has some holes on the side so you can remove the mouser legs and plug in the legs in to the belt. The mouser looks great on its own but the mouser attached to the hand cannon does not look so great. Maybe if the mouser had a little more articulation so you could adjust the way he sits on the hand cannon it would look a bit better. I also noticed there were some bad mold pulls on this set. The roboto style blue gun and one of the toes on the mousers foot was misshapen. Aside from the mouser not looking very good on the cannon and the bad mold pulls I like this figure a lot.
21
views
Sega Funeral Frieren Luminasta prize figure.
Today we open a Sega prize Frieren. This prize figure comes in several parts. The assembly is simple and everything fits together nice and snug. Initially i put the flowers in to her left hand and the palm of her left hand the the outside of her right held them in place. They are meant to be slipped in to her right hand. I noticed some kind of black paint rub on her left hand fingers so i broke out the lighter fluid and cleaned the paint rub off. This is a nice little figure and for a prize it does look great. I hope you enjoyed the video. Thank you for watching. Take it easy.
26
views
Kotobukiya DC Comics Black Canary Bishoujo Statue
Today we open a Black Canary. These Kotobukiya statues get better and better. The sculpt and paint work look great. She has a bit of a tiny glittery look on her hair. Unlike a lot of the other statues the base is screwed in to her feet. I prefer the attached base like this. The fishnet stockings are soft material attached to the top and bottom of her legs but move freely on her legs. I hope you enjoyed the video. Thank you for watching. Take it easy.
43
views
WWE Superstars Andre the Giant unboxing
Today we open a Giant. I love this figure. At first I thought he was the same height as the rest of the line but bulkier. Then i noticed his shin pegs and no boots on them. Having opened several of these figures I expected he would have his blue trunks under the cloth singlet. I was thinking I wish he had the fro hair instead of the short hair. Then I opened the accessory packs and there was the fro. I am rally happy with this figure. This is my favorite from this line by far. My only complaint is that he did not come with any extra hands. Unless they make more giant figures there are not going to be any alternate hands that fit this figure. He needs a claw and a chopping hand for sure. This is another instance where I think the people working on these figures actually know the source material and love it. I hope you enjoyed the video. Thank you for watching. Take it easy.
33
views
McFarlane toys Warhammer 40k Necron Flayer proof unboxing
Today we open a Necron Flayer proof. This proof is unpainted. The sculpt is a little different from the other Necron Flayer in this wave of figures. The shoulders and spine are ball joints giving him a great deal of range in the articulation in these areas. This figure is also fairly easy to balance and stand up. I am not a fan of the unpainted McFarlane proof figures. I am not much of a painter though. Maybe someone who is appreciated them. I have not kept up with this line but I would like to pick up more from this McFarlane 40k line. I hope you enjoyed the video. Thank you for watching. Take it easy.
24
views
Temu Tuesday "1 Set Of Desktop Mini Bowling, Stress Relief Game Set, Desktop Bowling Games"
Today we open a frog bowling game. This little playset comes with tiny bowling pins and two metal balls. The pins are easy to setup with the built in lever that raises the area around where the pins stand. They drop in easy and with the lever pressed you can easily move around the set without pins falling all over. To play the game you set up the pins, place a ball in front of the frogs face and pull and release the spring loaded lever behind the frog. Just something simple for a child to get minutes of enjoyment out of or to sit on your desk for when you are feeling froggy. I hope you enjoyed the video. Thank you for watching. Take it easy.
Temu Affiliate code: acm818077
19
views
Masters of the universe Classics Icarius
Today we open an Icarius. Icarius comes with a spare helmet-less head, a jet pack glider, a shield and missiles. Icarius had removable chest armor. The armor is rubbery and plugs together. There is a small box on the back of the armor where the glider connects to the armor. The glider attached snug. The glider does make him a bit top heavy but it was not difficult to balance Icarius at all. The visor on the helmet head was stuck in place at first. It does partially raise up on his head while riding in a dimpled hinge. Speaking of stuck his ankle cuts were completely solid. I had to bent his leg at the knee and twist the ankle to free them. MOTUC are really great figures. This is another figure you can still pick up cheap. Do not pass him up if you are interested in the design. I hope you enjoyed the video. Thank you for watching. Take it easy.
23
views
1
comment
Making Atari 2600 cartridge dust covers
Today we have a video of when I created a dust plug piece for my 2600 carts that do not have the built in dust covers. I created the plug to work on any cart. It is easy to insert and remove and will keep the dust out. I hope you enjoyed the video. Thank you for watching. If you need on of these you can find them listed on my Jellydinosaur etsy store. Take it easy.
37
views
Jakks Pacific Sonic the Hedgehog Wave 10 Amy 4" figure
Today we open another Amy. This is the wave 10 Amy. The only difference between this Wave 10 amy and Wave six amy is the nose. Wave 10 Amy has a oval nose while the wave six Amy has a triangular nose. While I was comparing the two I noticed the brown paint on the hammer for the older figure has transferred to her hand. You may want to keep that in mind while displaying her. Maybe sealing the hammer paint would be a good idea. I hope you enjoyed the video. Thank you for watching. Take it easy.
16
views
What is in the box - Gunbuster Edition
Today we open and watch an old promo VHS tape for Gunbuster on the PC Engine Super CD Rom system. I picked this up on Japanese Mercari. The VHS tape ran great and was mold free. I always enjoy finding and watching old promo VHS tapes to see what is on them. I hope you enjoyed the video. Thank you for watching. Take it easy.
17
views
Jakks Pacific Sonic the Hedgehog Wave 11 Knuckles 4" figure
Today we open a Knuckles. This Knuckles is a little different than some of the other knuckles. This Knuckles has an open gripping hand and a bit of a smirk. The rest of the figure is pretty much the same as some of the past and later wave Knuckles. The articulation remains the same. His head movement is limited by his hair. The shoulders and legs are on a hinged swivel. There are hinges on the knees. The hands can be rotated. His accessory is one of the spring launchers and it does have a spring inside to give it a little press to it. I hope you enjoyed the video. Thank you for watching. Take it easy.
5
views