How to Make Clark Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/47UfL2j
✅ ETSY: https://bit.ly/4af0wCN
SIZE
TALL: 8.7" (22 cm)
WIDE: 6.7" (17 cm)
DEEP: 3.7" (9.5 cm)
MATERIALS
- BODY: 3.5 oz (1.6 mm) leather. You can make 2 bags from 11 sqft (1 sqm).
- LINING: 1 mm thick shoe stiffener (PITEX/TEXXON) and 1.5 oz (0.6 mm) pigskin.
- CONTRAST LEATHER: 6 oz (2.4 mm) leather
- STRAPS: 9 oz (3.6 mm) leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
- 1 LOXX or Sam Browne stud
- 2 x 3/4" (20 mm) D rings
- 1 x 1" (25 mm) buckle
- 58 snap rivets
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:26 Cut the leather and dye the edges
1:07 Punching the holes, stitching the slots
4:42 Making the closed pocket, isntalling the magnetic clasp
8:39 Stitching the bag
12:33 Edge dye again
13:20 The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
29
views
How to Make Carter Messenger Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/474Sh9N
✅ ETSY: https://bit.ly/40dDO9d
SIZE
TALL: 9.6" (24.5 cm)
WIDE: 12.6" (32 cm)
DEEP: 5.1" (13 cm)
FRONT POCKET
TALL: 7.3" (18.5 cm)
WIDE: 10.2" (26 cm)
DEEP: 1.2" (3 cm)
SIDE POCKETS
TALL: 5.3" (13.5 cm)
WIDE: 3.5" (9 cm)
DEEP: 1.2" (3 cm)
MATERIALS
- BODY: 6-6.5 oz (2.4-2.6 mm) vegetable tanned leather
- STRAPS: 9-10 oz (3.6-4 mm) vegetable tanned leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
-2 Sam Browne studs
- 2 x 3/4" (20 mm) buckles
- 2 x 1.4" (35 mm) buckles
- 2 x 1" (25 mm) D rings
- 2 x 3/4" (20 mm) D rings
- 2 x 3/4" (20 mm) swivel hooks
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:43 Cutting the leather
1:25 Making the side pockets
11:17 Stitching the handle
17:23 Stitching the gusset
19:44 Reinforcing the flap
21:33 Installing the front buckle
25:02 Making the handle cover
26:14 Making the shoulder straps
30:59The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
22
views
How to Make Flora Crossbody Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3S0Go0p
✅ ETSY: https://bit.ly/3Qn6Wrh
SIZE
TALL: 8.7" (22 cm)
WIDE: 7.5-8.7" (19-22 cm)
DEEP: 2" (5 cm)
MATERIALS
- BODY: 4.5-5 oz (1.8-2 mm) leather. Or line a leather to achieve this thickness.
- CONTRAST LEATHER: 5 oz (2 mm) leather
- STRAPS: 7 oz (2.8 mm) leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
-1 magnetic clasp
- 1 x 1" (25 mm) buckle
- 1 x 1.2" (30m) buckle
- 2 x 0.75" (20 mm) D rings
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:22 Cutting and linin the leather
2:15 Stitching the bag
3:25 Installing the hardware
4:46 Stitching the gusset
8:28 Installing the magnetic clasp
9:49 Making the shoulder straps
14:15 The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
26
views
How to Make The Anastasia Tote Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://vasileandpavel.com/products/pdf-pattern-video-anastasia-tote-bag
✅ ETSY: https://www.etsy.com/listing/1567615712/
SIZE
TALL: 12" (31 cm)
WIDE: 15.8" (40 cm)
DEEP: 4" (10 cm)
HANDLE DROP: 12.6" (32 cm)
MATERIALS
- BODY (BLUE): 3.5-4 oz (1.4-1.6 mm) soft, upholstery leather
- CONTRAST LEATHER (YELLOW): 3.5-4 oz (1.4-1.6 mm) soft, upholstery leather
- INSIDE SLEEVE: 2 or (0.8 mm) rigid leather
- STRAPS: 8 oz (3.2 mm) leather or glue together blue+yellow
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
- 1x 13.8" (35 cm) zipper
- 4 x 3/4" (20 mm) buckles
- 2 x 3/4" (20 mm) D rings
- 2 x 1" (25 mm) swivel hooks
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
1:16 Cut the leather and dye the edges
3:33 Stitching the bottom and the straps
7:22 Stitching the gussets
20:02 Installing the zipper
26:51 Making the inside sleeve
31:12 Making the handles
31:47 The finished Anastasia tote bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#totebag #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
16
views
How to Make a McLeod Sporran (Link to Pattern in Description)
8:56 Stithing in zig zag the gussetLink to the PDF pattern:
✅ WEBSITE: https://bit.ly/46dulkm
✅ ETSY: https://bit.ly/3EDpVXZ
VIDEO TUTORIAL ZIG ZAG STITCHING: https://youtu.be/QfWOgKM2lpc
SIZE
TALL: 7.9" (20 cm)
WIDE: 7.9" (20 cm)
DEEP: 1.5" (4 cm)
MATERIALS
- BODY: 4.5 - 5 oz (1.8- 2 mm) leather lined with 1.25 oz (0.5 mm) pigskin or 6-6.5 o (2.4-2.6 mm) vegtan leather. Around 2 sqft (0.2 sqm) leather
- CONTRAST LEATHER: 2.5 oz (1 mm) rigid leather
- STRAPS: 5-6 oz oz (2-2.4 mm) rigid leather
- 1 mm waxed thread
- edge dye
- glue
HARDWARE (FOR EACH)
- 2 x 0.75" (20 mm) D rings
- 2 x 0.6" (15 mm) buckles
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:36 First sporran; Cutting, lining, punching and dyeing the edges
8:56 Stitching in zig zag the gusset to the front panel
13:27 Attaching the gusset to the back panel
15:54 Making the tassels
21:55 Installing the magnetic clasp
22:55 Making the straps
25:17 Making the second sporran
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#sporran #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
18
views
How to Make the Geronimo Backpack (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3P0FihR
✅ ETSY: https://bit.ly/3OW8czT
VIDEO TUTORIAL ZIG ZAG STITCHING: https://youtu.be/QfWOgKM2lpc
SIZE
TALL: 14" (36 cm)
WIDE: 10" (25 cm)
DEEP: 2.4" (6 cm)
MATERIALS
- BODY: 7 oz (2.8 mm) vegetable leather
- STRAPS: 9 oz (3.6 mm) leather
- 1 mm waxed thread
- yellow and dark brown Fiebings Pro Dye (or other color/s)
- Resolene Fiebings finish
- edge dye
- glue
HARDWARE
- 1 magnetic claps
- 4 x 1" (25 mm) D rings
- 2 x 1.18" (30 mm) buckles
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:33 Dyeing the leather
1:07 Punching the holes, stitching the slots
4:42 Making the closed pocket, isntalling the magnetic clasp
8:39 Stitching the bag
12:33 Edge dye again
13:20 The finished backpack!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#backpackdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
12
views
How to Make Eva Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3QRVRPC
✅ ETSY: https://bit.ly/3skUAGB
Zig Zag Stitching Video Tutorial: https://youtu.be/QfWOgKM2lpc
SIZE
TALL: 5.9" (15 cm)
WIDE: 7.9" (20 cm)
DEEP: 2" (5 cm)
MATERIALS
- BODY: 5.5 oz (2.2 mm) leather (around 3.3 sqft (0.3 sqm). Lining for the back panel: 1.5 oz (0.6 mm)
- STRAPS: 7.5 oz (3 mm) leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
-1 magnetic clasp
- 2 x 3/4" (20 mm) buckles
- 2 x 3/4" (20 mm) D rings
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:21 Presenting the zig zag stitching
3:19 Stitching the pocket with zig zag stitching
9:36 Stitching the gusset with zig zag stitching
13:55 Installing the hardware
22:22 Making the shoulder straps
23:20 The finished bag!
13:20 The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
10
views
How to Make Lotus Phone Bags (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3E1erxi
✅ ETSY: https://bit.ly/3E6WLA9
SIZE
LOTUS PINK BAG
TALL: 9" (25 cm)
WIDE: 9" (25 cm)
DEEP: 1.5" (4 cm)
LOTUS BLUE PHONE BAG
TALL: 6.7" (17 cm)
WIDE: 5.9" (15 cm)
DEEP: 1.4" (3.5 cm)
MATERIALS
- BODY: 4 oz (1.6 mm) soft leather not stretchy).
For the pink bag you need a 11/24" (27/60 cm) piece
For the blue bag you need a 7/16" (16/40 cm) piece
- CONTRAST LEATHER: 4 oz (1.6 mm) rigid leather
- STRAPS: 8 oz (3.2 mm) rigid leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
PINK
-1 x 3/4" (20 mm) buckle
- 2 x 3/4" (20 mm) D rings
BLUE
- 1 x 2/3" (15 mm) buckle
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:31 Making the pink bag
12:23 Making the blue phone bag
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
24
views
How to Make Van Gogh Briefcase (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3DOhsAS
✅ ETSY: https://bit.ly/3rWAbaH
SIZE
TALL: 11 1/2" (29 cm)
WIDE: 15 3/4" (40 cm)
DEEP: 2 x compartments of 1 3/4" (4.5 cm)
MATERIALS
- BODY: less than16 sqft (1.5 sqm) 3.5 oz leather lined 2 oz (0.6 mm) pigskin and shoe stiffener (620 PITEX) to achieve 6.5 oz (2.6 mm)
- STRAPS: 8-8.5 oz (3.4 mm) leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
- 2 x 1.18" (30 mm) buckles
- 4 x 3/4" (20 mm) D rings
- 2 x 1" (25 mm) swivel hooks
- 1 x 1" (25 mm) buckle
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- grover
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:31 Cutting and lining the leather
4:49 Installing the hardware
7:28 Stitching the gussets
9:24 Making an inside pocket
11:14 Stitching the gussets - cont
25:32 Making the shoulder strap with padding and the handle
30:36 The finished briefcase bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
12
views
Making the Marion Backpack and the Robin Pouch (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3DIsM1A
✅ ETSY: https://bit.ly/3YmQTMs
SIZE
MARION BACKPACK
TALL: 10 1/4" (26 cm)
WIDE: 5 1/2" (14 cm)
DEEP: 5 1/2" (14 cm)
ROBIN POUCH
TALL: 6 2/3" (17 cm)
WIDE: 3 3/4" (9.5 cm)
DEEP: 3 3/4" (9.5 cm)
MATERIALS
- BODY: 4 oz (1.6 mm) leather
- LEATHER FOR STRAPS: 7.5 oz (3 mm) leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
MARION BACKPACK
- 1 magnetic clasp
- 3 x 3/4" (20 mm) buckles
- 2 x 3/4" (20 mm) swivel hooks
- 1 x 3/4" (20 mm) D ring
ROBIN POUCH
- 1 x 3/4" (20 mm) buckle
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:30 Cut the leather and dye the edges
3:10 Prepare the straps for hardware
5:31 Preparing the gusstes
6:18 Making the flap
7:52 Stitching the gussets
8:50 Stitching the flap
11:07 Installing the magnetic clasp
12:25 Making the shoulder straps
13:41 The finsihed Marion backpack
13:57 Making the Robin pouch
16:27 The finished Robin pouch!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
12
views
How to Make the Ridley Satchel Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3O8atYl
✅ ETSY: https://bit.ly/47270mV
SIZE
TALL: 10 1/4" (26 cm)
WIDE: 9 1/2" (24.5 cm)
DEEP: 2 1/2" (6.5 cm)
MATERIALS
- BODY: 6 oz (2.4 mm) leather. Around 5.2 sqft (0.5 sqm)
- CONTRAST LEATHER: around 2.5 oz (1 mm) semirigid leather
- STRAPS: 7-8 oz (2.8-3.2 mm) leather
- INSIDE SLEEVES: 1.5-2.5 oz (1-1.4 mm) leather
- 1 mm waxed thread
- edge paint
HARDWARE
-1 magnetic clasp
- 1 x 1.3" (35 mm) buckle
- 2 x 3/4" (20 mm) buckles
- 2 x 3/4" (20 mm) D rings
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:28 Cut the leather
1:49 Installing the magnetic clasp
4:54 Stitching the bag
5:36 Pro Tips: Making the inside sleeves
7:31 Preparing the gusset for stitching
8:24 Stitching the gusset
9:25 Installing the hardware
14:14 Making the shoulder straps
15:53 The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
12
views
How to Make the Candy Mini Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3OmrfnX
✅ ETSY: https://bit.ly/44VWxaL
SIZE
TALL: 5" (13 cm)
WIDE: 10 1/4" (26 cm)
DEEP: 2 /12" (6.5 cm)
MATERIALS
- PINK: around 3 sqft (0.3 sqm) 4 oz (1.6 mm) leather lined with 1.5 oz (0.6 mm) pigskin
- RED: 3.5 oz (1.4 mm) leather lined with 1.5 oz (0.6 mm) pigskin
- STRAPS: red+pink leather glued together
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
-220 mm zipper
- 1 magnetic clasp
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:30 Cut and line the leather
2:02 Stitching the mini bag
3:56 Installing the hardware
5:15 Stitching the mini bag- continuation
6:59 Stitching the zipper
11:35 Making the shoulder strap
14:08 The finished mini bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
5
views
60s Crosbody Bag, FREE Pattern (Link in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3Dfkaz6
SIZE
TALL: 6 2/3" (17 cm)
WIDE: 6 2/3" (17 cm)
DEEP: 4" (10 cm)
MATERIALS
- BODY: less than 5 sqft (0.5 sqm) of 4 oz (1.6 mm) leather lined with shoe stiffener (I used PITEX) and pigskin
- LINING: PITEX (available on ETSY), 2 oz (0.8 mm) pigskin
- STRAPS and CONTRAST LEATHER: 7-7.5 oz (2.8-3 mm) leather
- 1 mm waxed thread
- edge paint
HARDWARE
- 1 magnetic clasp
- 2 x 3/4" (20 mm) buckles
- 1 x 1.18" (30 mm) buckle
- 2 x 3/4" (20 mm) D rings
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:26 Cut the leather and dye the edges
1:07 Punching the holes, stitching the slots
4:42 Making the closed pocket, isntalling the magnetic clasp
8:39 Stitching the wallet
12:33 Edge dye again
13:20 The finished wallet!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
10
views
How to Make the Iris Crossbody Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/43jAF81
✅ ETSY: https://bit.ly/3ObyCOK
SIZE
TALL: 4 3/4" (12 cm)
WIDE: 8 2/3" (22 cm)
DEEP: 3 1/4" (8.5 cm)
MATERIALS
- BODY: 3-3.5 oz (1.2-1.4 mm) leather (4.3 sqft - 0.4 sqm)
- LINING: 2 OZ (0.8 mm) pigskin, shoe stiffener (PITEX 650 - available on ETSY)
- CONTRAST LEATHER: 4 oz (1.6 mm) semirigid leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
- LOXX closing system (or magnetic clasp - in this case you dont punch the holes for the LOXX)
www.loxx.shop/en/individualparts
You should order ALL these parts:
Loxx lower part for fabric - vintage brass, Item# 1200
Loxx upper part smooth head - vintage brass, Item# 1191
Loxx high washer for 1-4 mm clamping area Farbe: Altmessing, Item# 1785
- 2 x 1" (25 mm) D rings
- 1 x 1" (25 mm) buckle
- 2 decorative screws
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- 10 mm diameter hole punch (for LOXX)
- 20 mm hole punch (for LOXX)
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:32 Cut and line the leather
4:38 Stitching the bag
7:27 Making the inside sleeve (pocket)
10:44 Stitching the gussets
12:33 Attaching the handle, installing the hardware
16:04 The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
7
views
How to Make a Leather Blueprint Tube: Tips and Tricks and Link to Pattern in Description
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3XGV3yr
✅ ETSY: https://bit.ly/3XDQFQS
VERY IMPORTANT
The pattern is designed to be used with precisely 7.5 oz (3 mm) rigid leather or leather lined to achieve 7.5 oz (3 mm) thickness (as presented in the instructional video). Please watch the video.
SIZE
DIAMETER (inside): 4.3" (11 cm)
TALL: 32" (82 cm)
MATERIALS
- BODY (BLACK and YELOW): around 5.5sqft (0.5 sqm) 4 - 4.05 oz (1.6-1.8 mm) leather lined with shoe stiffener(PITEX) and pigskin to achieve exactly 7.5 oz (3 m) thickness. The pattern is designed for precisely this thickness.
- STRAPS: 8 oz (3.2 m) leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
-2 Sam Browne studs
- 2 x 3/4" (20 mm) D rings
- 1 x 3/4" (20 mm) buckle
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
INSTRUCTIONAL VIDEO FOR SIMPLIFIED BOX STITCHING
✔️ https://youtu.be/L_7ooZY0M2c
✔️ https://youtu.be/RO6EHVIErgw
Enjoy!
⌚ Timestamps
0:00 Introduction
0:31 Cutting and lining the leather and finishing the edges
2:59 Stitching the small parts
4:21 Stitching the blueprint tube body
8:42 Stitching the body and the lid
15:00 Installing the hardware
16:24 Making the shoulder strap
18:00 The finished blueprint tube!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#blueprinttube #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
21
views
How to Make The Hazel Crossbody with Tips and Tricks (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/44j6OOp
✅ ETSY: https://bit.ly/3r3am8x
SPECIFICATIONS
- Adjustable shoulder straps
- inside sleeve
SIZE
TALL: 8.7" (22 cm)
WIDE: 9.5" (24 cm)
DEEP: 3.5” (9 cm)
MATERIALS
- BODY: around 5.4 sqft (0.5 sqm) 3-3.5 oz (1.2-1.4 mm) leather lined with 2 oz (0.8 mm) pigskin + 4 oz (1.6 mm) vegetable tanned leather
- STRAPS: 6 oz (2.4 mm) leather
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
- 1 magnetic clasp
- 1 x 1" (30 mm) buckle
- 2 x 3/4" (20 mm) D rings
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Zig Zag Stitching Instructional Video: https://youtu.be/QfWOgKM2lpc
Enjoy!
⌚ Timestamps
0:00 Introduction
0:33 Cutting and lining the leather
3:33 Stitching the bag
12:55 Stitching the flap
14:46 Making the inside pocket (sleeve)
16:34 Installing the hardware (magnetic clasp)
20:15 The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
12
views
How to Make the Aphrodite Greek Flat Leather Sandals (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3qTRzwk
✅ ETSY: https://bit.ly/46iU9MO
SIZES (7 sizes)
36-42 EU size
5.5-11.5 US size
MATERIALS
- STRAPS: 6 oz (2.4 mm) vegetable tanned leather
- LEATHER SOLE: 10 oz (4 mm) vegetble tanened leather. It is preferably to line 6 oz (2.4 mm) vegetable tanned leather with 4 oz (1.6 mm) leather to achieve 10 oz leather.
- 1/3-3/4 ” (9-20 mm) EVA Foam or a pair of flip flops sole. You can buy them locally or online or from an Etsy shop like this: https://www.etsy.com/listing/828822777/
- leather glue
- waxed polyester thread
- edge paint
- 40 grit sandpaper
HARDWARE
- 2 x 3/5" (15 mm) buckles
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:12 Cutting the soles
5:19 Making the leather straps
10:24 Assembling the sandals
13:57 The finished sandals!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#sandals #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
27
views
How to Make the TOSHIRO Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3CsleiR
✅ ETSY: https://bit.ly/460Ifad
SIZE
TALL: 10" (25 cm)
WIDE: 13 3/4" (35cm)
DEEP: 5 1/2" (14 cm)
MATERIALS
- BODY: around 8.5 sqft (0.8 sqm) 4-4.5 oz (2.2-2.4 mm) vegetable tanned leather.
- CONTRAST LEATHER: around 2 sqft (0.2 sqm) 7 oz (2.8 mm) vegetable tanned leather
- LINING: PITEX 650, 1.5 oz (0.6 mm) pigskin
- 1 mm waxed thread
- edge paint
- glue
HARDWARE
- 4 x 3/4" (20 mm) D rings
- 3 x 1.2" (30 mm) buckles
- 2 x 3/4" (20 mm) buckles
- 4 x 3/4" (20 mm) swivel hooks
- 4 Sam Browne studs
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
1:25 Dyeing the leather
2:09 First cut of leather and lining
23:27 Making the handle and the straps
29:00 Punching the holes
29:56 Stitching the pockets
43:13 Stitching the gussets
46:42 Stitching the ears on the flap
51:18 Making the shoulder straps
55:03 The finished Toshiro Bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
22
views
How to Make The Button Backpack (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/43yj7p6
✅ ETSY: https://bit.ly/42dr69T
SIZE
TALL: 15 3/4" (40 cm)
WIDE: 11" (28 cm)
DEEP: 4 2/3" (11 cm)
MATERIALS
- BODY: around 7.5 sqft (0.7 sqm) of 4 oz (1.6 mm) leather lined with 2 oz (0.6 mm) pigskin
- CONTRAST LEATHER: 7.5 oz (3 mm) leather. The bottom is lined with 2.5 oz (1 mm) leather
- 1 mm waxed thread
- edge dye
- glue
HARDWARE
-2 x 1" (25 mm) buckles
- 4 x 3/4" (20 mm) D rings
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:23 Cutting and punching the leather
4:54 Stitching the backpack
12:14 Closing system with a leather button
18:00 Making the shoulder straps
19:11 The finished backpack!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#backpackdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
23
views
How to Make a Travel Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3qd48CI
✅ ETSY: https://bit.ly/3OFARuG
SIZE
TALL: 10" (25 cm)
WIDE: 22" (55cm)
DEEP: 10" (25 cm)
HANDLE DROP: 6 1/4" (16 cm)
MATERIALS
- BODY: around 15 sqft (1.4 sqm) 6 oz (2.4 mm) leather.
- CONTRAST LEATHER: around 5.5 sqft (0.5 sqm) vegetable tanned leather
- LINING: 2.5 oz (1 mm) leather
- 1 mm waxed thread
- edge dye
- glue
HARDWARE
- 20 1/2" (52 cm) zipper - the part with teeth
- 4 x 1" (20 mm) D rings
- 2 x 1 1/5" (30 mm) buckle
-2 snap fasteners
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- grover (optional)
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:26 Cut the leather
6:32 Stitching the travel bag
16:35 Making shoulder straps
18:40 The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (34K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
16
views
How to Make a Bifold Wallet (Link to Pattern in Description)
This contains a PDF pattern and an instructional video for making a leather bifold wallet that features 4 card slots and an inside pocket for bills.
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/42IbXi8
✅ ETSY: https://bit.ly/3IkWEUp
SIZE
CLOSED: 3 1/3" (8.5 cm)
OPEN: 6 2/3" (17 cm)
WIDE: 4 1/3" (11 cm)
MATERIALS
- 3 oz (1.2 mm) leather
- 1.5 oz (0.6 mm) leather/pigskin for lining
- 0.6 mm round thread (I used Galaces)
- edge dye
TOOLS
- cutter
- needles
- pricking irons (I used diamond chisel from Crimson Hides)
- cutting mat
- mallet
Japanese Style Crimson Irons: https://crimsonhides.com/products/crimson-irons
Enjoy!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ Feel free to make and sell the item. Please credit #VasileandPavel for the pattern when you post photos.
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (more than 32K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bifoldwallet #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
3
views
How to Make a Laser Cut and Engraved Bag (Link to Pattern and DXF in Description)
Join us in this video as we create a bag that will be cut and engraved using the Creality CR Falcon 2 22W laser. This hands-on experiment will demonstrate the effectiveness and efficiency of this machine for leathercrafters.
Thank you for watching!
**WHERE TO ORDER**
Official Store: https://bit.ly/41xtF6H
Code: Falcon50($190.1 Off)
Final Price: $889.00
Amazon: https://bit.ly/41xTjIu
Code: UMTHH3GR ($150 off)
Final Price: $1,149
Link to the PDF pattern and DXF file:
✅ WEBSITE: https://bit.ly/3NCTHC1
✅ ETSY: https://bit.ly/3LZaRsb
SIZE
TALL: 5 1/2" (14 cm)
WIDE: 6 3/4" (17 cm)
DEEP: 1 3/4" (4.5 cm)
MATERIALS
- 6 oz (2.4 mm) vegetable tanned leather
- 1 mm waxed thread
- edge dye
- glue
HARDWARE
- 1 x LOXX closing system
- 1 x 1" (25 mm) buckle
- 2 x 3/4" (20 mm) D rings
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- 10 mm hole punch (for the LOXX closing system)
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#lasercutbag #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
7
views
How to Make the Magnus Bag (Link to Pattern in Description)
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3LVpGMn
✅ ETSY: https://bit.ly/42soXYH
SIZE
TALL: 8 1/2" (22 cm)
WIDE: 7 1/2" (19.5 cm)
DEEP: 2 3/4" (7 cm)
MATERIALS
- 3-3.5 oz (1.2-1.4 mm) leather. You can make 2 bags from 11 sqft (1 sqm).
- LINING: shoe stiffener (PITEX) (1 mm and 0.6 mm). 1.5 oz (0.6 mm) pigskin
- 1 mm waxed thread
- edge dye
- glue
PITEX: https://www.etsy.com/listing/907142244/pitex-non-woven-leather-stiffener-06081
HARDWARE
- 1 metal clasp turn lock twist
- 2 x 3/4" (20 mm) D rings
- 2 x 1" (25 mm) swivel hooks
- 1 x 1" (25 mm) buckle
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:28 Presentation of the bag
1:19 Cutting and lining the leather
16:46 Stitching the decorative elements
18:28 Making the inside sleeve
22:43 Stitching the bag
25:17 Installing the hardware
29:24 Making the shoulder straps
31:16 The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
7
views
How to Make the Giselle Bag (Link to Pattern in Description)
The Gissele bag features an inside detachable sleeve.
Link to the PDF pattern:
✅ WEBSITE: https://bit.ly/3MRFiS9
✅ ETSY: https://etsy.me/3GUlIkl
SIZE
TALL: 7 1/2" (19 cm)
WIDE: 9 1/2" (24 cm)
DEEP: 5" (13 cm)
MATERIALS
- BODY: 5 oz (2 mm) firm leather. Around 5.5 sqf (0.5 sqm).
- CONTRAST LEATHER: 7.5 oz (3 mm) firm leather
- 1 mm waxed thread
- edge dye
- glue
HARDWARE
- 2 Sam Browne studs
- 3 x 1" (25 mm) buckles
- 2 x 1" (25 mm) swivel hooks
- 4 x 3/4" (20 mm) D rings
- 2 snap fasteners for the inside sleeve
TOOLS
- cutter
- needles
- 1/16" (1.5 mm) hole punch
- cutting mat
- mallet
Enjoy!
⌚ Timestamps
0:00 Introduction
0:26 Cut the leather and dye the edges
1:43 How I make the keepers
2:24 Making the straps for hardware
3:39 Making the handle
6:11 Making the inside sleeve
8:19 Stitching the accessories
10:51 Stitching the gussets
13:36 Making the shoulder straps
15:04 The finished bag!
MORE PATTERNS
✔️ https://etsy.me/3czsNXU
✔️ http://vasileandpavel.com/
PRINTING INSTRUCTIONS
✔️ https://youtu.be/fNxdZRaUzXk
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#bagdiy #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
11
views
Creality CR Falcon 2 22W Review: Is it Worth Buying for Leathercrafting?
In this video, we will be taking a look at the Creality CR Falcon 2 22W laser and its usefulness for leathercrafting. If you're a leathercrafter looking for a laser cutter to enhance your work, this review will help you decide if the Creality CR Falcon 2 is the right choice for you. We'll be discussing its features, ease of use, and overall performance to help you make an informed decision before investing in this laser cutter. So, let's get started and find out if the Creality CR Falcon 2 is worth buying for leathercrafting!
Thank you for watching!
**WHERE TO ORDER**
Official Store: https://bit.ly/41xtF6H
Code: Falcon50($190.1 Off)
Final Price: $889.00
Amazon: https://bit.ly/41xTjIu
Code: UMTHH3GR ($150 off)
Final Price: $1,149
⌚ Timestamps
00:00 Unboxing and comparison of CR Falcon 1 and CR Falcon 2
4:58 How to create a speed and power test in Lightburn
7:12 Engrave vegetable tanned leather
9:56 Making an engraved leather coaster
11:01 Testing CR Falcon 2 cutting power
11:06 Cutting 2 oz (0.8 mm) vegtan leather
12:33 Cutting 6 oz (2.4 mm) vegtan leather
14:13 Cutting 7.5 oz (3 mm) vegtan leather
15:29 Cutting 10 oz (4 mm) vegtan leather
16:21 Cutting 1/8 inch (3 mm) MDF (Making a box for leather belts)
16:58 Cutting and engraving acrylic, making an acrylic stamp or leather
18:03 Engraving metal
18:34 Engraving anodized aluminum
18:54 Engraving glass
21:11 Cleaning the laser lens
23:28 Conclusions
JOIN OUR COMMUNITY
✔️ https://www.facebook.com/groups/leatherpattern3dprintedmolds
***FOLLOW US***
FACEBOOK
✔️ https://www.facebook.com/vasileandpavel
✔️ https://www.facebook.com/Pavelcrafts
INSTAGRAM
✔️ https://www.instagram.com/vasileandpavel/
✔️ https://www.instagram.com/pavelcraftleather/
✔️ If you create or purchase anything from Vasile and Pavel, please tag us or use the @vasileandpavel on instagram! We would love to see and share your work!
✔️ Our affordable patterns are available here: https://vasileandpavel.com/
✔️ We are happy to share your work on our Instagram (33K followers). For this, just add @vasileandpavel in your story and we will share you back.
✔️ Please contact us on Facebook Group if you need our assistance.
✔️ Thank you for purchasing our patterns!
©️ 1988-2023 Vasile and Pavel. All rights reserved. (https://vasileandpavel.com/)
#lasercuttingmachine #leatherpattern #vasileandpavel
Like our videos? Please buy a coffee or become a member of our channel!
https://www.buymeacoffee.com/vasileandpavel
53
views