Graybeard RC

Took the Losi Promoto-MX to a local ball diamond to try out the Promoto on dirt. It was rooster tail city and a blast. Went through 3 packs while I was there.

The rain finally stopped and the grass dried out a little so I took the Promoto-MX out for aroma in the backyard. This will be the first time I have run it with a full battery. The stock battery took 9.5 hours to charge with the included Smart charger on a 12w wall wart. Ordered a QC3 wall wart we'll see how that goes. So far it isn't looking to bad it's been charging for about 1.5 hrs and it between 75-100% This thing is a blast to drive.

The was the initial run of the Losi Promoto-MX it lasted about 5 minutes but the battery was on about 75% charged after being on the cheap Smart charger included with the RTR version.

Built a UTB24 using a SCX24 Deadbolt and the Injora Rock Buggy. Injora Beadlock wheels & tires 62mm. Brass diff cover and knuckles. ACGRC mini servos. Radiolink rx and Furitek Momentum esc.

The first run for the AX24 charged the battery and took it for a spin on the indoor course.

Built a GSpeed LCG using a Element Enduro Builder's Kit. Wasn't real happy with the stock foams in the Hydrox knockoffs. Tried printing some foams with TPU but just wasn't happy with them. Decided to design my own and printed them with TPE with 5%/15% infill in front and 8%/18% infill in the rear.

The is the 1st run of the GSpeed using a Element Enduro Builders Kit for running gear, suspension etc. The transmission is a dig that is sold on Amazon.

Testing a new GSpeed build using a Enduro Builders Kit with the Amazon dig transmission

Time to blow the cob webs off the stock SCX24 B17 Betty. It's fun but doesn't crawl as well as the other SCX24's

Filmed some crawling of the SCX24s at my basement track. Using the Insta360 one X2

Testing the new Insta360 One X2 360 camera. To late to go outside so I fired up the Scx24 Deadbolt and ran it on the inside track.

The SCX24 Jeep Rubicon crawling at Rubbleville. Also was practicing with the Insta360 Go2 hanging under the TX

Have to take advantage of these kind of days when they arrive. So a buddy and I went to Fishpot creek to check it out. I took my Traxxas TRX4 and he took is Redcat Gen 8. This was filmed with my Insta360 Go 2 and Osmo Action

Bought a Insta360 Go 2 64 GB model to use in the filming of my RC vehicles. To cold to play outside so I tried it inside using my SCX24's and indoor track.

Testing the Gopro Hero 6 on the transmitter mount

Testing a new camera mount using the 1/6 1941 Willys MB Scaler. The mount attaches to the transmitter to make it easier to follow the RC vehicle. For this test the GoPro Max was used.

Took the 1941 MB Scalier to a local park for a trail run. A buddy tagged along with his Redcat Gen8 Kit

Put a Caddx Ant camera and a Eachine Nano vtx in my custom built SkuttleBug85 which a concept copy of the Shutterbug85. Crazybee Pro v3 FC, 1102 11000 kv motors with Arvan 3 blade props. The vtx was set to 100 mw

Running the SCX24's at Rubbleville by backyard crawling course

Put a Caddx Ant and Eachine Nano Vtx v2 on my 85mm whoop with a Crazybee F4 Pro v3 and Betafpv 1102 18000kv motors. This is replacing the Caddx Kangroo and MO2 vtx it did have in it.

This is my 2nd Tinyhawk S, the 1st one died so instead of buying a new FC for $50 or a new THS for $99. Now I have spare parts other than a FC for my Tinyhawk. I'm just flying around the small course in my basement.

Using the Traxxas TRX4 to test the layout of the backyard crawling track I am building