Toyota 2024 GT4 Cup | Round 2 from Knockhill Circuit
Welcome everyone to Round 2 of our Toyota GT4 Cup series.
This series will have 10 rounds. Each round will have 2 races.
There will be a 15 minute qualifying which will set the grid for race 1.
Race 2's grid will be defined by qualifying but with the top 5 reversed.
This will be a fixed setup series, just fuel and brake bias to be adjusted then.
The car, Toyota Supra GT4 is a free download, Link below. All tracks used are also FREE.
Qualifying will start at 8pm each race meeting. There will be a mandatory drivers briefing before qualifying at 7:45. All drivers are to be in the drivers briefing channel.
ALL drivers are to be in our Discord during the races. If you need a dedicated voice channel 1 can be created for you. If you are not on our Discord, you may not race!
Skins are allowed, and can be sent to myself or dropped in the custom-skins channel to compile the skin pack.
Once skins are created and packs upload, they will be added to SimSync should you have any issues simply run SimSync then.
GT4 Championship Tracks are:
1: 21/1/24 - East London (Workshop)
2: 28/1/24 - Knockhill (Workshop)
3: 4/2/24 - Zwartkops (Workshop)
4: 11/2/24 - Oulton Park (Workshop)
5: 18/2/24 - Classic Kyalami (SimSync)
6: 25/2/24 - Road Atlanta (Workshop)
7: 3/3/24 - Aldo Scribante (Workshop)
8: 10/3/24 - Hockenheim (Workshop)
9: 17/3/24 - Kyalami 2016 (Workshop)
10: 24/3/24 - Valencia (Workshop)
The car is a free download on the Steam Workshop.
https://steamcommunity.com/sharedfile...
Custom skins are allowed.
Live Timing link : http://simexperiencesa.ddns.net:8000/...
Be sure to keep an eye out for the sign up for this series should you wish to join.
Another special thanks goes out to LOM1138 for creating some incredible overlays we were able to use.
Thanks to Riaan van der Westhuizen for helping with the liveries and also to all our community member also helping out to make this a possibility.
If you are not yet a community member, please consider joining our Discord via the link below.
Discord Link : https://discord.com/invite/HAG93mQCXv
PLEASE LIKE, SUBSCRIBE & HIT THAT NOTIFICATION BELL! :)
34
views
RaceRoom Random Fun Race MX5s
Welcome to the Sim Experience SA
Tonight is just a fun stream, but we will be using RaceRoom Racing Experience for the 2nd time!
The car is a Mazda MX5 Cup and is in DLC packs. The track is also DLc or part of various packs.
Another special thanks goes out to LOM1138 for creating some incredible overlays we were able to use.
If you are not yet a community member, please consider joining our Discord via the link below.
Discord Link : https://discord.gg/HAG93mQCXv
PLEASE LIKE, SUBSCRIBE & HIT THAT NOTIFICATION BELL! :)
10
views
Sim Experience SA - Weldmech 2023 Porsche Supercup | Round 10 from Monza
Welcome to the Sim Experience SA WELDMECH PORSCHE SUPERCUP SERIES.
Proudly brought to you by WELDMECH.
This will be a closely fought championship using the incredible rFactor 2 992 Porsche Cup car DLC.
The champions will have a total of 10 rounds across 9 different countries from Italy all the way to Japan. Each round will have qualifying, which will set the starting order for both race 1 and race 2 and earn the pole sitter 2 points. Both races will score the same points including 2 points for fastest lap.
Race Format for the Weldmech Porsche Supercup Series:
Drivers Briefing for 15 minutes at 17:40
60 min practice starting at 17:55pm.
30 min qualifying starting at 19:00.
Race 1 starting around 19:35.
Race 2 starting around 8:15pm.
Both races will have formation laps with standing starts.
2023 Weldmech Porsche Supercup Series Rounds as follows :
Round 1 : Imola (Paid DLC)
Round 2: Monaco (Paid DLC)
Round 3: Kyalami (Free Mod)
Round 4: Silverstone (Free Content)
Round 5: Nurburgring (Paid DLC)
Round 6: Spa (Paid DLC)
Round 7: Suzuka (Free Mod)
Round 8: Zandvoort (Free Content)
Round 9: Montreal (Free Mod)
Round 10 : Monza (Paid DLC)
Cars are paid DLC on the rFactor Steam Store Page :
https://steamcommunity.com/sharedfile...
Custom skins are allowed and added via a skin pack.
Live Timing link : http://simexperiencesa.ddns.net:8000/...
Tune In EVERY SUNDAY for what Is sure to be an extremely close championship!
A huge THANK YOU goes out to our title sponsor Weldmech as well as HiRevolution.
www.facebook.com/weldingmechanic
www.hirevolution.co.za
Another special thanks goes out to LOM1138 for creating some incredible overlays we were able to use.
Thanks to Riaan van der Westhuizen for helping with the liveries and also to all our community member also helping out to make this a possibility.
If you are not yet a community member, please consider joining our Discord via the link below.
Discord Link :
Discord Link : https://discord.gg/HAG93mQCXv
PLEASE LIKE, SUBSCRIBE & HIT THAT NOTIFICATION BELL! :)
13
views
Sim Experience SA - Weldmech 2023 Porsche Supercup | Round 9 from Montreal
Welcome to the Sim Experience SA WELDMECH PORSCHE SUPERCUP SERIES.
Proudly brought to you by WELDMECH.
This will be a closely fought championship using the incredible rFactor 2 992 Porsche Cup car DLC.
The champions will have a total of 10 rounds across 9 different countries from Italy all the way to Japan. Each round will have qualifying, which will set the starting order for both race 1 and race 2 and earn the pole sitter 2 points. Both races will score the same points including 2 points for fastest lap.
Race Format for the Weldmech Porsche Supercup Series:
Drivers Briefing for 15 minutes at 17:40
60 min practice starting at 17:55pm.
30 min qualifying starting at 19:00.
Race 1 starting around 19:35.
Race 2 starting around 8:15pm.
Both races will have formation laps with standing starts.
2023 Weldmech Porsche Supercup Series Rounds as follows :
Round 1 : Imola (Paid DLC)
Round 2: Monaco (Paid DLC)
Round 3: Kyalami (Free Mod)
Round 4: Silverstone (Free Content)
Round 5: Nurburgring (Paid DLC)
Round 6: Spa (Paid DLC)
Round 7: Suzuka (Free Mod)
Round 8: Zandvoort (Free Content)
Round 9: Montreal (Free Mod)
Round 10 : Monza (Paid DLC)
Cars are paid DLC on the rFactor Steam Store Page :
https://steamcommunity.com/sharedfile...
Custom skins are allowed and added via a skin pack.
Live Timing link : http://simexperiencesa.ddns.net:8000/...
Tune In EVERY SUNDAY for what Is sure to be an extremely close championship!
A huge THANK YOU goes out to our title sponsor Weldmech as well as HiRevolution.
www.facebook.com/weldingmechanic
www.hirevolution.co.za
Another special thanks goes out to LOM1138 for creating some incredible overlays we were able to use.
Thanks to Riaan van der Westhuizen for helping with the liveries and also to all our community member also helping out to make this a possibility.
If you are not yet a community member, please consider joining our Discord via the link below.
Discord Link :
/ discord
PLEASE LIKE, SUBSCRIBE & HIT THAT NOTIFICATION BELL! :)
13
views
Sim Experience SA Intro
Welcome to Sim Experience SA.
All are welcome to join us in our racing focused community.
16
views