Bunyip PA13 pump, Beatrice River in Nth QLD, Australia.
This Bunyip PA13 pump is operating on a little stream that runs into the Beatrice River in Nth QLD, Australia and is narrated by Brett Porta.
Working of a Fall off 1 metres, Flow rate of around 3 lts per second down a 100 mm PVC pipe 11 metres long and pumping to a vertical head of 14 metres. The out put is around 5 lts per minute or 7,000 lts per day.
2
views
Bunyip PA13 pump Butchers creek in Nth QLD, Australia.
This Bunyip PA13 pump is operating on a little stream that runs into the Butchers creek in Nth QLD, Australia and is narrated by Brett Porta.
Working of a Fall off 1.5 metres, Flow rate of around 4 lts per second down a 100 mm PVC pipe 30 metres long and pumping to a vertical head of 13 metres. The out put is around 6 lts per minute or 8,600 lts per day.
2
views
Bunyip PA13 pump near Tarzali, Far North Qld.
This Bunyip PA13 pump near Tarzali, Far North Qld. The power to pump water is coming from a 800mm fall through a 100mm pipe about 17 to 18 m long, flow of around 4.5 lts/sec, pumping up to a 38m vertical head, output of around 2,200 lts/day.
#agriculture #hobbyfarm #livestock #offgrid #homesteading #offgridliving #offgridewater #rampump #aussiemade #freeenergy #water
9
views
Bunyip Water Powered Water Pump
This Bunyip is a PA13 model, 13 is the tyre size. There is a 600mm fall to drive the pump and the water flow is at around 6 lts per second so this is determining the cycling of the water pump, and it pumping to a small head of 10 metres with a good output per day of around 20,000 lts. Website: www.bunyipwaterpumps.com