SCMotorsports

Tried fixing some minor issues with my 6R80 Transmission, to only have it snowball on me.

I finally decided to remake my home made paint booth. I made the paint booth out of PVC pipe. I wanted it to be collapsible and moveable. I also wanted to make sure it was big enough to fit a full size truck inside of it. I made the booth roughly 24' x 12'.

I thought this was going to be a simple muffler upgrade and got more than I bargained for. Trying out different mufflers is search for the right sound. Flowmaster Flow FX, Magnaflow XL, Ace Race Ultra Quiet Resonators, Hooker Turbo Mufflers, Flowmaster dBX Series.

Finally got around to installing the 417FOX Radio Bezel upgrade kit on my 91 Fox Body and I also installed some much needed hood shocks to get rid of that pesky hood prop rod.

Installing the Banks iDash Supergauge & Datamonster on my truck so I can read more engine vitals and datalog when I need too.

I get the factory check engine light working with the new ECM. I get the factory cable driven Speedometer to work with the 6R80 Transmission. And I install a Catch Can for the PCV system with custom lines.

Decided to remake the Coyote Intake and see if it helps with the drivability. Also checked out Cars & Caffeine in my area.

Finally got this Project back on the Road. It Boogies!

I box in and modify the Trans Crossmember for the 6R80. I also install a shift pattern sensor from Dakota Digital. Gear Shift Sending Unit: https://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=1222/category_id=-1/mode=prod/prd1222.htm Gear Position Indicator: https://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=482/category_id=401/mode=prod/prd482.htm Stifflers 6R80 Bracket: https://buystifflers.com/6r80-transmission-mounting-bracket/

Attending the 3rd Annual Mustangs On The Mississippi at Treasure Island Casino

Finally got my project done to the point so I could fire up the Engine. Mistakes were made but it sounds good!

Modifying and installing my Hydroboost & Master Cylinder on the truck. I also tell my story about how I thought I was scammed. The last video before first fire up.

Wiring up the Control Pack, Shifter, etc. I get an intake pipe installed and I finally finish painting the suspension parts.

Just showing you how I made custom Headers & Exhaust for the truck.

My parts finally show up and I install a new Front IFS setup from Scott's Hot Rods in the truck.

This time around I work on some miscellaneous parts to the build. I get the shift cable figured out. I get the firewall pass through for the steering column figured out. I install the accelerator pedal. I also get some wiring done and find a place to mount the Speedo adapter box. Shift Cable = Ford JR3P-7E395-AC Speedometer = Dakota Digital ECD-200BT-5

Getting the new F150 console shifter for the 6R80 to fit in my custom center console.

Starting off my Coyote Swap project on my Ranger, but first I have to take out the Bad to make room for the Good.

Just reposting this video from a few years ago. Had to redo the music. lol

Modifying the Radiator support and installing a new radiator in the Ranger. Also installing a Trans Cooler while I'm at it. I also cover my front accessory drive and the new KRC Power Steering pump. Here are some of the parts I used: Rubber Isolaters - https://www.amazon.com/dp/B0BC1RCJSF?psc=1&ref=ppx_yo2ov_dt_b_product_details Radiator - https://www.cfrperformance.com/products/cfr-1979-93-ford-5-0l-302-direct-fit-aluminum-radiator-w-at-cooler-direct-replacement P/S Pump - https://www.summitracing.com/parts/krs-kit66302125 Filler Neck - https://www.northernradiator.com/Product/Z17605?criteria=z17605

A short video of making Custom Headlights for my 89 Ford Ranger. LED lights - https://www.amazon.com/gp/product/B0B427CQCY/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&th=1 LED drivers - https://www.aliexpress.us/item/2251832408806677.html?spm=a2g0o.order_list.order_list_main.4.730e1802iFEnQG&gatewayAdapt=glo2usa&_randl_shipto=US

I'm modifying the firewall for more room for exhaust & transmission.