ScMachinst77

Using our custom inserted step drill in Hastelloy X.

One of my upcoming videos! Our shop designed and created a custom step drill for a part made from Hastelloy X.

This is Part 3 of this series. I show how no geometry is needed if you create Setup Stock. We add a chamfer tool and de-burr the two sharp edges. Then I show how useful stock models are in keeping up with what each tool path is doing.

This is a job I'm currently working on. Wanted to share with everyone. Hope you enjoy. I know there are sections of the video where the machining audio does not match the video. I did my best. The camera was not cooperating. This part was programmed using Mastercam.

Machining hast-x blanks for a job at work.

This is a quick non instructional video where I design, model and print a part so I can attach a test indicator to my Anycubic Kobra Plus. The only purpose for this is to check and see how square the build plate is to the X and Y axis.

This is Part of my Basics series of Mastercam. I finish generating tool paths to machine a simple part.

This is part 3 of my Mastercam Basics series. In this Part 3 continue to show how to use some of my favorite tool paths to machine a simple part. Below is the link to the company who sells "Piranha Jaws" https://www.shop.mmm-usa.com/store

This is part 2 of my Basics series. I'll show you how to select tools, do simple edits and add holders. I also go over a facing toolpath.

THIS VIDEO IS TO HELP YOU HAVE A BETTER UNDERSTANDING OF THE 3D AND 2D WORK ENVIRONMENT OF MASTERCAM. WE WILL BRIEFLY DISCUSS THE WCS, G-VIEW, C-PLANE AND T-PLANE. IM GOING TO SHOW YOU HOW TO CREATE YOU OWN CUSTOM VIEW FROM A SOLID FEATURE AND ILL ALSO GIVE QUICK EXAMPLES OF 2D AND 3D GEOMETRY CREATION. WITH EACH EXAMPLE ILL TALK ABOUT THE PURPOSE AND USE OF EACH OF THESE FUNCTIONS.

This is the first video of a series on the basic use of Mastercam. I show you how to move an imported model to origin and then create stock. Once stock is created I then move the part along with stock to a specific origin without creating a new WCS. This is a basic demonstration not a how to, I only want to get you familiar with the basics. Its up to the individual to take it upon themselves to actually use the software and learn from experience. I will answer questions to the best of my ability. Please interact and ask any questions! Thanks and enjoy!

This is a brief introduction of what I plan on sharing in the near future! Please excuse the audio I'm hoping to get a better mic soon!