TShannon68

Removing and replacing the front brakes and rotors.

Running down why my 4 wheel drive wouldn't engage. Raised the truck so the tires were off the ground to see which driveshafts were turning in 4 wheel drive and in 2 wheel drive. Found that the actuator at the transfer case was working properly. Tracked it down to the front actuator. Removed and bench tested the actuator. Found it wasn't working. Bought a new one and installed it.

Overdrive not working. It had code P0344. Replaced the camshaft position sensor which fixed it.

Found an easy way to remove MDS solenoids. Thought I would share

Shows how NOT to remove wrist pins from pistons and I suggest a better way.

In this video I will remove the door panel to access the door lock actuator and remove and replace with a working unit. Then adjust the door handle.

In this video I'll be removing the tailgate access panel to determine why the tailgate wouldn't latch. Finding the problem and fixing it.

Replacing the passenger side hub assembly. Having to deal with a lug nut I couldn't get off.

Tracking down why my tailgate is sticking and fixing the problem

Removing and Replacing Leaf Springs on a 1997 Dodge Ram 1500

Locating and Replacing an Output/Vehicle Speed Sensor on a 1997 Dodge Ram 1500 4x4