Oil Filter Wrench - Chain Type 120mm VIKTEC AUTO Tools
For removing all oil filters
.This robust chain wrench has been designed to remove oil filters up to 120mm diameter
.The chain is simply located around the filter and turned the chain will tighten to the diameter of the filter.
.Durable aluminum handle
11
views
VIKTEC 46pc Harmonic Balancer Puller Set #Specialtytool
Removes balancers, pulleys and gears with tapped holes.
Floating swivel prevents damage to shaft end.
Four slots in yoke for two-or-three-hole application.
Bolt tool to balancer with center screw on end of crank shaft.
Tighten while tapping on end of screw head to remove balancer.
14
views
Welcome to the Spring Canton Fair 2024 VIKTEC
Our Booth No.: Hall 12.1 F07-08
Date: April 15th to April 19th
Warmly welcome and looking forward to all new and old customers visiting VIKTEC’s booth!
We have new hot-selling tools and wonderful gifts at our booth!
Please feel free to contact us if you would like to visit: info@chinaviktec.com
15
views
VIKTEC Thread Repair Kit15pc box set M12 X 1.5#Threadrepair #Specialtytool
Thread Repair Kit15pc box set M12 X 1.5
Include:
M12 X 1.5*16.3mm
.10pc Wire Thread Inserts
.1pc Installation Tools
.1pc Break Pin Tools
.1pc Twist Drills
.1pc Hex Key
.1pc Taps
For more information please visit our website: www.chinaviktec.com.
16
views
VIKTEC Valve Seal Removal And Installer Kit #Specialtytools
.Works on both valves still seated or removed.
.Precision machined seal driving adapters guide the seal for proper setting set contains.
.1pc valve stem seal pliers.
.1pc drive handle 6"/150mm long.
.2pc deep seal driving sockets for seals o.d. 10.8 - 14.8mm.
.7pcs seal driving adapters fit seals 5, 5.5, 6, 6.5, 7, 8mm and 3/8".
For more information visit our website: www.chinaviktec.com.
49
views
VIKTEC Cylinder Leak Detector#Cylinder #Specialtytools
Best used when comparing a suspect cylinder to a know-good cylinder on same engine.
Ideal for testing trucks & late-model cars where clearance is minimal.
Equipped with 2-1/2"input pressure gauge for proper leakage test setup and accurate results.
Designed to detect various common engine faults including worn piston rings, worn valves, cylinder head cracks, and blown head gaskets.
Suitable for use on any petrol engine with 10, 12 or 14mm spark plugs.
18
views
Universal Motorcycle Pulley Holder(36-110mm) For Flywheel And Clutch Pulleys#Specialtytools
Universal Holder Pin Type 36-110mm For Flywheel And Clutch Pulleys
.Suitable for flywheel and clutch pulleys
.Adjustable from 36-110mm with lockable adjuster bolt
.Non-slip coated handle for safety and comfort
.Heat treated,black finished
19
views
Universal Motorcycle Pulley Holder 70-130mm For Flywheel And Clutch Pulleys #Specialtytools
Universal Holder Slot Type 70-130mm For Flywheel And Clutch Pulleys
.Suitable for flywheel and clutch pulleys
.Adjustable from 70-125mm with lockable adjuster bolt
.Non-slip coated handle for safety and comfort
.PVC dipped handle gives added comfort.
.Heat-treated,black finished
.Work range: 70-130mm
20
views
CV Joint Boot and Hose Clip Tool with Cutter #Specialtytools
Quality-made tool designed to aid fast tensioning and securing of CV Joint boot banding material.
Simply insert the banding, tension using winding mechanism, and then pull over the lever to cut the band to length.
Fitted with a large and comfortable handle grip.
Maximum band capacity: 1mm thick x 10mm wide.
For more information please visit www.chinaviktec.com.
20
views
VIKTEC Panel Clip Plier#speciatytool
.Use the head of the plier to insert the plastic button of the plate.
.Then push the tool and remove the plastic button.
.It is save manpower with pull straight.
.Heat-treated,carbon steel construction body.
.Comfort dipped handle for sure grip.
.Easy to slid into confined areas, suitable for many types of round and squre clips,fasteners.
.Great for automotive interior and exterior trimming work.
Visit our website: www.chinaviktec.com.
20
views
2PC Exhaust Puller Tool Set #handtool #specialtytool
.Invaluable when installing exhaust systems.
.Two T-handled tools allow easy fitting of exhaust mounts.
.One straight and one hooked to suit block and ring mounts respectively.
.Removes and replaces rubber ring-style hangers used on late-model cars.
.Simply hook tool through the rubber mounting ring and stretch until released from hook on the muffler, pipe or frame.
.Reverse procedure for installation.
23
views
9PC Hose Clamp Clip Remover Pliers Tool Set #specialtytool
Hose Clamp Pliers
Swivel Jaw Spring Wire Clip Pliers
Swivel Jaw Spring Band Clip Pliers
Flat Band Clip Pliers
Angled Flat Band Clip Pliers
Hose Remover Pliers
Clic-R Collar Pliers
Screwdriver
Hose Pick Tool
24
views
42pc UNF,UNC and Metric Rethreader Kit #threadrepair #specialtytool
.Taps and dies are suitable for chasing out damaged threads and the removal of nicks and burrs without undercutting good threads
.Thread file restores damaged external threads on any diameter, right or left-hand
.Supplied in carry-case
.21pcs threader
Visit our website to get more: www.chinaviktec.com.
24
views
Comprehensive Cooling System and Radiator Cap Pressure Tester#Specialtytool
This is a traditional style cooling system pressure testing kit with an updated selection of adaptors to fit popular European and Japanese vehicles including Alfa, Audi, BMW, Benz, Chrysler, Citroen, Ford, Honda, Mazda, Mercedes, Mitsubishi, Nissan, Opel.
26
views
VIKTEC Automechanika Shanghai Booth NO.: 5.2H88
The National Exhibition and Convention Center (NECC) from 29 November to 2 December 2023 in Shanghai China.
All VIKTEC's professional sales teams are waiting for you at the Frankfurt Shanghai exhibition.
25
views
3pcs Tail Pipe Expander Exhaust Muffler Spreader Tool Set#autorepair
This tool is ideal for fitting aftermarket components to standard exhausts. It is used to expand the length of the pipe in equal proportions so the pipe is the same diameter and not tapered.
Ensures a perfect fit with no leaks and also removes dents and clamp marks.
Capacity: Small; 30-44mm, Medium; 38-61mm, Large; 55-85mm.
Include a 16mm Hex Drive, a 17mm Hex Drive, and a 19mm Hex Drive.
Come to our website to get more: www.chinaviktec.com.
26
views
Chain Breaker and Riveting Tool Set VIKTEC's Patent Product #autorepair
Universal application for use on motorcycle drive chains and cam chains on cars
For Breaking and Joining most drive chains with a diameter of 35 to 630.
Kit includes 3 pin sizes to fit most chains: 2.2, 2.9 en 3.8 mm.
Recommended for light to medium-duty use.
For riveting hollow nose master links.
Pins are designed
Pins Material: Alloy Steel
27
views
VT01695 Diesel Engine Setting and Locking Kit #diesel #VW
Diesel Engine Setting/Locking Kit - VW 2.5D TDi PD / 4.9D - Gear Drive
Suitable for VW 2.5D TDi PD gear drive diesel engines where the camshaft, crankshaft and auxiliary shafts are all linked by a geared mechanism.
OEM (s): T10193, T10199, T10199/01, T10225, T10226, T10234
Application(s):
VW: Touareg (03-10), Transporter (03-09)
Suitable for use on Volkswagen Touareg and Transporter 2.5 TDi models.
34
views
VT18067 Engine Timing Kit for Ford EcoBoost (FOX) Engine#enginetool #Ford
This engine timing tool kit has been designed specifically for these post-2018 chain-driven engines.
Ford applications include: C-Max (from 2017), Focus (from 2018), Transit Connect (from 2017), Puma (from 2019) Fiesta (from 2017).
Engine applications: engine codes: B7DA, B3DA.
Kit includes VVT locking tools equivalent to OEM 303-1661, 303-1661/1 & 303-1661/2. Includes VVT camshaft sprocket socket.
You can visit www.chinaviktec to get more.
27
views
VT18692 Crankshaft pulley assembly-for FORD 1.0#autotools #autorepair
.Specially designed to remove and install the crankshaft pulley, in order to replace the timing belt.
.Applicable: FORD 1.0L Ecoboost engine.
.FM number: 303-1611, 303-1611-01, 303-1611-02.
.Includes a torque multiplier.
.Max torque: input-300Nm, output-1,500Nm.
.Gear ratio: 1:5, input drive: 1/2, output: 3/4.
Visit our website: www.chianviktec.com to get more.
28
views
12PC Double Mechanical Bearing Separator and Puller Set#autotools#bearingtool
.Mechanical puller set with Ø30-50mm and Ø50-75mm separators and single yoke with 180mm thrust bolt.
.Suitable for engineering, automotive, marine and agricultural applications.
.Supplied in blow mould case.
.Contents: Separators: Ø30-50mm, Ø50-75mm, Thrust bolt 180mm, Extension bars: 4 * 130, 4 * 105mm, Cross beam 160mm.
.Separator size: Ø30-50mm, Ø50-75mm.
.Maximum reach: 170mm, 220mm.
Welcome to visit our website:www.chinaviktec.com to get more.
26
views
VIKTEC‘s hyot-sale tool:VT01053B#petrol#enginetool#compressiontest
This Compression tester is fitted with a 63mm gauge reading up to 300psi and 20kg/cm2.
Kit includes 130mm straight and angled push-on connectors, and 400mm flexible extension with 8, 10, 12, 14, and 18mm adapters.
Size of Four Thread Adapters: M8 X 1.5, M10 X 1.0, M12 X 1.25, M14 X 1.25.
Welcome to visit our website: www.chinaviktec.com to get more.
26
views
VIKTEC Diesel Injector Seal Puller Removal Tool#Diesel Injector#Injector Seal Puller#autorepair
This professional tool is used to assist in removing the copper gasket that seals the diesel injector into the cylinder head. These gaskets, located at the bottom of the injector bore, are a common failure point and are often tightly bound by carbon deposits. Extraction is often almost impossible without this tool.
Tip diameter: 4.5mm (minimum) to 13.2mm (maximum).
You can get to our website to get more:www.chinaviktec.com.
42
views