rethajoanna

It is powered by an Sellita SW-200 movement, made in La Chaux-de-Fonds (Switzerland) and modified by Bruno Söhnle. The saphire crystal is surrounded by a rose gold ion-plated stainless steel bezel. The black dial with rose gold indices and hands complete the portrait of this elegant dresswatch priced at approx. 1300 USD.

It´s powered by the famous Omega 752 automatic movement. A nice and robust in-house-movement, red-golden colored and equipped with a swan-neck fine adjustment. It beats at 19800bph and the lift angle of the balance is at 49°.

I´ve found it in a mixed lot of some other watches. Lucky me, it´s not a fake one. It´s powered by the Breitling B17 automatic movement, a modified ETA 2824-2. It beats at 28800bph and the lift angle of the balance is at 52°. The referencenumber of this Breitling is A17035 and it´s made between 1992 and 1998.

It´s a Maurice Lacroix 1490, powered by an ETA 2671. It beats at 28800bph, the lift-angle of the balance is at 51° and it has a power reserve of 38 hours. This movement was released in the early 70´s but can be found in many ladies-watches even today.

It´s a Vostok Komandirskie U-Boat and it´s powered by the Vostok 2414 hand-winding movement. It beats at 19800bph and the lift angle of the balance is at 42°. The inscription on the bottom of the dial says: "caenaho b cccp" (made in ussr) so it´s made somewhen in the 80´s.

It´s the Breitling B17 automatic movement, a modified ETA 2824-2. It beats at 28800bph and the lift angle of the balance is at 52°. The referencenumber of this Breitling is A17035 and it´s made between 1992 and 1998.

It´s powered by the Omega 1012 automatic movement and it beats at 28800bph, the lift angle of the balance is at 52°. Omega introduced this model back in 1972 on the international collection.

It´s powered by the Longines L615, a modified ETA 2895-2 automatic movement. It beats at 28800bph, the lift angle of the balance is at 51° and it has a power reserve of 42 hours.This model has a stunning "flinque-decor" on the dial, together with the blued steel hands this is definitly a watch to wear on those elegant dinners.

It´s powered by the Breitling B17, a modified ETA 2824-2 automatic movement. It beats at 28800bph, the lift angle of the balance is at 52° and it has a power reserve of 42 hours. The reference number of this watch is A17350 and it´s chronometer-certified.

I need to grind off the old chrome. After sanding and polishing the case, it´s ready for a new chrome-plating. But i need to add a layer of nickel before. The glass will be polished and the movement cleaned. Unfortunately the old radium-compound on the hands fell off so i need to re-lume the hands with super-luminova. I will add some coffee to it to make it more "vintage-looking".

This time I´m restoring a Glashütte Chronometer from the 60`s.It´s powered by the GUB 70.3 caliber (chronometer certified)

The watch is in a bad condition: The stainless-steel-case is damaged, the glass is not original, glass and bezel are scratched and the movement is not running. As I try to wind-up the movement it winds-down immediately. Seems like an issue on the escapement-wheel.

This time I purely assembled the Seiko NH36 automatic movement and tried to make a relaxing video of the whole process. As I know you like ASMR, i tried to place my external microphone as close to the process as possible.

It´s a soviet, gold-plated watch made by the first russian watch factory.It´s powered by the Poljot 2609H caliber a hand-wind movement with 17 rubis and a shock protection. It beats with 21600 bph and the lift angle of the balance is 51°.

It´s powered by the Poljot 2409 caliber, a hand-wind movement with 17 rubis and a shock protection. It beats with 18000 bph and the lift angle of the balance is 42°.

The reference number of the watch is 1500, it features a hacking-function (movement-stop when the time is set) and an instant date-change function.

This time I´m restoring a Cyma pocket watch. It´s from the pre-world-war 2 period and about 100 years old.

It´s a Helma with an AS 1130 movement (also known as "Wehrmachts-Uhrwerk").Based on its engraving on the caseback it´s an official military service watch worn by the german armed forces (Wehrmacht) during the war.

The watch become famous as Cliff Booth (played by Brad Pitt) worn it in the movie "Once upon a time in Hollywood"

This limited edition, japanese automatic watch features a power reserve indicator. The watch is powered by the Seiko 4R57A movement.

It has a 0.925 silver-cushion case and is powered by the Rolex 600 handwind-movement. The Rolex 600 movement was introduced in 1922. Based on the stamps on the caseback this watch should have been made between 1923 and 1925. Giving the fact, Rolex was born in 1920, it can be said that this watch is one of their first model ever made.

This time I´m rebuilding the "Alexander Shorokhoff Sixtythree" automatic watch. This german automatic watch is powered by the Sellita SW300 movement. The rotor of the movement is hand-engraved in Alzenau/Germany and can be seen through the case-back. It features a second-stop and a date-indication at 6 o´clock.

"This time I´m restoring a vintage Rolex Datejust from 1991. It´s powered by the famous Rolex 3135 automatic-movement and it has one of those rare Rolex-Logo-Dials. Watches with those dials are hard to find and prices reach easily 7000$ or more."

"This time I´m restoring a World War 1 Military Trench Watch made by Lancet. The watch become famous as Butch Coolidge (played by Bruce Willis) worn it in the movie ""Pulp Fiction""."

Restoration $4000 Breitling watch after motorcycle crash | destroyed Superocean Heritage Chronometer